ArtSpace Makercoin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Makercoin:
For Art Space art therapy studio.
To celebrate the Heart of Concord event
60mm x 8mm = 1 hour = 13 grams of filament
100mm x 8mm = 2 hours
The edge of the coin has a 2mm peg so the coin can be printed on support material.
I tried to print with 1221 Art Space facing up. The top was fine, the bed side was not good.
Edit: use files AS-coin-7 top & bottom
I solved the problem of the top looking good and the bottom being poor quality.
(see final image, v6-heads = it sucks)
Only print the tops!
Cut the coin in half, print the heads and tails sides separately and glue them together.
Plus + It needs no supports, thus prints twice as fast.
Version 6 is the same as v7, but the whole coin is 1 piece.