ArtSpace Makercoin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A token trophy for participating artists in the Heart of Concord exhibition
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 1
- Views
- 32
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Makercoin:
For Art Space art therapy studio.
To celebrate the Heart of Concord event
60mm x 8mm = 1 hour = 13 grams of filament
100mm x 8mm = 2 hours
The edge of the coin has a 2mm peg so the coin can be printed on support material.
I tried to print with 1221 Art Space facing up. The top was fine, the bed side was not good.
Edit: use files AS-coin-7 top & bottom
I solved the problem of the top looking good and the bottom being poor quality.
(see final image, v6-heads = it sucks)
Only print the tops!
Cut the coin in half, print the heads and tails sides separately and glue them together.
Plus + It needs no supports, thus prints twice as fast.
Version 6 is the same as v7, but the whole coin is 1 piece.