Geeetech PETG Spool Creality CFS adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Geeetach spool Creality CFS adapter
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 149
- Wydruki
- 0
- Wyświetlenia
- 694
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Design Concept
I bought some PETG filament from Geeetech and noticed they don't sit right in the CFS and have feed issues. All the spool adapters I found are for 200mm diameter spools. But these new spools I got are slightly smaller. I made these to fit these specific spools. I believe the size of these are about 199.5-.6mm somewhere. The spool rings are a tight fit but once fitter they aren't going anywhere. Also added a hole to be able to loop the filament so it doesn't untangle as most adapters have omitted this and cover up the holes, making it harder to fiddle around.
Printing Recommendations
To achieve optimal performance, print using a well-maintained printer at a temperature suitable for PETG material. Ensure the adapter is printed in a robust and heat-resistant material to withstand regular use.
Assembly Instructions
Simply snap fit the adapter onto the spool holder on your 3D printer. No additional tools or adhesives are needed, making it easy to install and remove when necessary.