1 / 7
TUL PYNQ-Z2 double-sided case — zdjęcie 1
1 / 7

TUL PYNQ-Z2 double-sided case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

a case to protect the pynq board. consists of a top and bottom part. requires 4x 16mm M3 bolts and 4x M3 nuts.

Ocena
0 / 5
Polubienia
0
Pobrania
13
Wydruki
0
Wyświetlenia
88
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Public Domain

what is it?

a case for the pynq-z2. made to protect the pynq so it can be carried hassle-free in bags without the fear of any damage. the rubber feet stick out a little so it doesn't slip when placed on a flat surface.

access to the pynq

case gives (partial) access to:
 

  • main power switch

  • “done” led

  • user-defined slide switches

  • 4 user-defined buttons and leds

  • microusb power

  • dc power in

  • ethernet 

  • line in

  • heaphone + mic

  • usb host

  • hdmi (in & out)

  • pmod (a & b)

  • all arduino pins

  • sd card reader

  • whatever the 4 pins between the programming buttons and user buttons are

  • jumpers (boot mode selection & power selection, but it's a tight squeeze)

  • raspberry pi header

materials required

  • 4x 16mm M3 screw

  • 4x M3 nut

 

Tagi