TUL PYNQ-Z2 double-sided case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a case to protect the pynq board. consists of a top and bottom part. requires 4x 16mm M3 bolts and 4x M3 nuts.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 88
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
what is it?
a case for the pynq-z2. made to protect the pynq so it can be carried hassle-free in bags without the fear of any damage. the rubber feet stick out a little so it doesn't slip when placed on a flat surface.
access to the pynq
case gives (partial) access to:
main power switch
“done” led
user-defined slide switches
4 user-defined buttons and leds
microusb power
dc power in
ethernet
line in
heaphone + mic
usb host
hdmi (in & out)
pmod (a & b)
all arduino pins
sd card reader
whatever the 4 pins between the programming buttons and user buttons are
jumpers (boot mode selection & power selection, but it's a tight squeeze)
raspberry pi header
materials required
4x 16mm M3 screw
4x M3 nut