Laser Cut DM Screen Initiative Tracker Rail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Laser cut wooden rail with magnets for tracking RPG initiative.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
Laser cut rail for initiative tracking.
I made this to have a place to use initiative trackers atop my wife's fancy wooden DM screen. The screen is much thicker than commercial cardboard DM screens, but it has metal sheets on the DM side for attaching magnets. I took advantage of that and made these rails which affix to the DM side and sit flush along the top, where trackers can be set and slid back and forth.
Mine is made out of 3mm basswood with 3x8mm round magnets glued into the holes (the smallest tab shaped pieces glue on the back of the tabs of the rails to thicken them and keep the magnets glued in place).
Works great with my 3d printed initiative trackers and sand timer holder:
