Liczymy pasujące modele…
A simple filament clip which prevents the filament from unwinding reliably! I've tested many filament clips in the past, but couldn't find one that I was 100% satisfied with. Out of this need I have designed this small clip! Since I read…
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
Diese Box in eine DMX Strecke zwischenstecken und die Lampen für einfache anwendungen per WLED steuern. Folgende Parts wurden verbaut: ESP32-S3 Mini / Zero SN75176 Neutrik XLR Einbau NC3FAAH NC3MAAH Die komponenten wurden mit dünnem…
Wydruk około 2,25 €–2,75 € nettoWstępna wycena jednego wariantu
Brand: Yonex, Victor, Li-ning, FZ, FUKUDA, Mizuno
Intro Will future Grandma 3d print her doilies? Only time will tell! :D I had this spontaneously… just though about my and other grandparents and about things they would use as coasters. From there I modeled these simple forms that remind…
Toroidal Windmill - Self adjusting turbine The smooth spinning Bearing Mod from the popular ‘Toroidal Windmill'. Insta Reel The mod uses 608 (6x22x8) Bearings for smooth & fast long time spinning. Beautiful Windmill with Toroidal…
EDIT - fixed the stump mimic bottom not being flat. Don't sit on it. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE Other supportless models…
Elf wizard miniature. Designed to print without supports on an FDM printer. I used 0,2 nozzle and 0,8 mm layer height. If you want to support me and get access to my weekly posts, please visit: https://www.patreon.com/cw/Umarty
Barbarian human wielding two axes. Designed to print without supports on an FDM printer. I used 0,2 nozzle and 0,8 mm layer height. If you want to support me and get access to my weekly posts, please visit: https://www.patreon.com/cw/Umarty
I made 3D model of the traditional thimble used by our grandma.
Female dwarf cleric miniature equipped with hammer and shield. Designed to print without supports on an FDM printer. I used 0,2 nozzle and 0,8 mm layer height. If you want to support me and get access to my weekly posts, please visit:…
A blank, matte-white model inspired by the gentle grace and nurturing spirit of a classic grandma figure. This DIY collectible is perfect for adding personal touches—ideal for cozy painting sessions and celebrating timeless love and wisdom.
Human fighter with two handed axe miniature. Designed to print without supports on an FDM printer. I used 0,2 nozzle and 0,8 mm layer height. If you want to support me and get access to my weekly posts, please visit:…
hdmi cover tolerance fits for pla Category: Gadgets
Introducing the WT-01 V1.1, the world's easiest wire EDM conversion! Designed for all desktop 3D printers, the WT-01 easily converts your FDM machine into a metal cutting powerhouse! Electrical discharge machining, or EDM, vaporizes any…
I made this stand for the PS2HDMI adapter so it doesn't hang and put stress on the AV port of the PS2. This stand should work on both the Slim and Fat models. This has a really tight fit, but after putting it and taking it off one time,…
Simple, flat, chonky TPU case. Feel free to customize. Suports needed. If using Bambu Studio just hit the support checkbox with "normal supports auto". Really recommend using dried filament. Be sure to leave it to dry for at least 4…
Mouse knight miniature. Designed to print without supports on an FDM printer. I used 0,2 nozzle and 0,8 mm layer height. Visor part of the helmet may be slightly chipped, especially on matte materials, may be needed to clean it a bit. If…
Human ranger miniature in 28 mm scale. Designed to print without supports on an FDM printer. Its made to be printed on 0,2 nozzle, because arrow feathers are very small. For 0,4mm nozzle use version with thicker parts. Have fun. If you…
I designed this clamp to reduce stress to the HDMI- and USB-connectors while using the camera connected to monitor or capture card. In addition to keeping the connectors in place, cables can be tied to the clamp body. This was designed…
Human paladin miniature. Designed to print without supports on an FDM printer. I used 0,2 nozzle and 0,8 mm layer height. If you want to support me and get access to my weekly posts, please visit: https://www.patreon.com/cw/Umarty
Female bard miniature playing violin in dancing pose. Designed to print without supports on an FDM printer. I used 0,2 nozzle and 0,8 mm layer height. If you want to support me and get access to my weekly posts, please visit:…
a Badminton Birdie print at 0.1 MM
Tiefling fighter in 28mm scale wielding a great sword. Designed to print without supports on an FDM printer. Level of detail visible on photo is achieved by 0,2 nozzle and 0,08 mm layer height. If you want to support me and get access to…
Case for BTT HDMI 7 v1.2. The included mounting bracket is pretty custom. I recommend using the bracket and arms from the official Voron github.…
This is a nice FDM print and as you see easy to paint Miniatures it is supportfree if you want more details use the magic 0,12mm layerhight it will print in 0,2 25min if you like speed and details use the ADAPTIV like cura 0,2mainlayer…
Vampire lord miniature in 28 mm scale. Part of the vampire set which includes: - Vampire servant miniature - Vampire baroness - Vampire lord Designed to print without supports on an FDM printer. Level of detail visible on photo is…
Update 2-5-2024: Improved rack design. Greatly improved the interlock to join two STLs to make 9, 10 or 11 bar racks. Added handles to the end caps and made them stronger. Also increased the height of the separator columns. Added three…
A 28mm scale miniature of an Elf bandit - ruthless and deadly first member of gang. The gang will include 5 figures: bandit elf bandit big bad brawler bandit female bandit swordsman bandit leader Designed to print without supports on an…
3D Sculpted Boxing Grandma – Funny Fighter Figurine
A DM screen with a built in player facing LCD, for showing off artwork, initiative tracker, or whatever else you want to show your players. I have even used it to show the webcam feed of a player that had to join through Discord. **Front…
Bake cookies that are a real smash! This set includes two cookie cutters: one shaped like a badminton racket and one like a shuttlecock. They're perfect for badminton fans, sports parties, or fun baking projects. These cutters are easy to…
Humidifier cap for feather shuttlecock tube. Add around 15 water gel bead ( https://www.amazon.ca/-/fr/gp/product/B01L) in the small hole. Then submerge the humidifier in the water overnight. Use the humidifier as endcap for you shuttle…
Easy to FDM print Larp coins. used for a private game.
**Introducing the ScorpionBot – A Miniature Marvel of Precision and Power!** Prepare to witness the ultimate fusion of nature’s deadliest predator and cutting-edge engineering! The **ScorpionBot** is a **3D-printable robotic…
KN62A DME For Flight Simulator Details in the YouTube Description: https://youtu.be/dYClLvKb3Dk
My grandma needed a sponge dish for her sink so here it is!
Handmade brushless motor
A Sorcerer never fights alone. If you see one look down at a puddle of spilled ale or a fresh corpse, back away. They're not grieving; they're knitting. They'll reach into The Sink, grab the first hateful, screaming thing they can find,…
Ist nichts kompliziertes. Hab es in PLA gedruckt und das auf 0,25mm Standartsettings beim Prusa Mini+. Reicht aus. Muss ja keinen Elefanten tragen.
The pictures are the short 26mm version. Love this model? Follow me to stay updated on new designs. Your support helps me continue creating quality models for the community.
This is experimental design allow using the Moose scanner with the Multi-Axis-Turntable. The position have been optimized for having excellent distance needed for the Moose scanner. The best position is the hole in the middle. For smaller…
prints in all sizes and all layers HAVe fun use prusament Marble for a good looking without paint PLEASE see the other miniatures i made TO support the Education ART-Center
it is designed for a supportless 0,12layer very detailed print Have fun If you Remix mark as remixed !!
Simple case built around the RPi 4B and Waveshare micro HDMI to HDMI Multi-functional Adapter. Uses 4 x M2*16 screws & nuts to hold the two halves of the case together. The M2 nuts need to have a socket size of 4mm to fit into the recess…
This 32mm base is designed to be printed on FDM with a flat top surface.
Giant fire beetle in 28 mm scale, its part of insect pack which includes: - Swarm of insects - Giant fire beetle - Carrion Crawler Designed to print without supports on an FDM printer. Level of detail visible on photo is achieved by 0,2…
This is a frame for your modded DMG. While waiting for real 3" lens restock, this one will do the job. Print Settings Printer: DiscoEasy 200 Rafts: No Supports: No Resolution: 0.2 Filament: Any PLA Category: Video Games
This handle has more space then the original with a rounded section for the fingers.
Gridfinity holder for 1/8" and 3.175mm endmills. Gridfinity endmill bin 1x2: 20PCs Gridfinity endmill bin 1x1: 11PCs Max endmill lenght: 38mm
Custom Badminton Stencils to be drawn on racquet strings.
Design Concept 🔥 UNDERWORLD THRONE – FDM FRIENDLY BAS-RELIEF Bring the power of the underworld to your print bed. This highly detailed bas-relief captures a dark ruler seated on a monumental throne, surrounded by fallen warriors, skulls,…
Couldn’t find an enclosure that fit my use case for the 5” screen so i made my own. Maybe i didn’t look hard enough bit it was a fun evening project. Hope this fits your needs. Materials: any could work, my use case is mobile, so TPU was…
Hyperpixel 4.0 Square Touch with Raspberry Pi5 enclosure (work in progress). (Update: 09/11/25 - I will be back to adjusting this design. Your input is very welcomed) This is the base test enclosure for an upcoming project. There are some…
Not the easiest print, there is very little contact with the build plate. Brim recommended (can work without) 0.2mm Layer height 6 walls/perimeters for max strength PLA/PETG
Badminton stencil for Buerdeng brand.
This is a case for a Raspberry 5 + NVMe and full size HDMI adapter It will fit the following Adapter boards: 52Pi Micro HDMI to HDMI Multifunctional Adapter for Raspberry Pi 5, with PCIe 3.0x1 M.2 slot, Support M.2 NVMe SSD 2230 2242…
My first model that works (Im just 12 yo) but everyone has to start somewhere :)
A stylized Paladin figurine designed specifically for FDM 3D printing. This model features chunky details and optimized angles to ensure a successful print with minimal effort. Perfect for tabletop gaming or as a desk mascot.
I wanted some wider feet for the adjustable legs on the DMC Mini Mill. Suggest printing them in TPU (60D) 6 Walls, 4 Top/Bottom Layers 25% (3d honeycomb) infill
HDMI strain relief for Pc's laptop's, anything electronic! I mad ethis because my laptop's hdmi cable would always black out randomly whenever I brushed up against it, especially when I pushed down on it, and with this I haven't had any…
22 Creedmoor stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
This is the Assembly tool for squaring the frame during assembly. Some kits were shipped without the laser cut jig. I have included the original STEP file, as well as an STL that has been trimmed to fit a Bambu X1/P1 printer. I printed in…
Small 5" HDMI display stand with 45 degrees tilted for better reading while it stands on desk.
7-inch HDMI display mount designed for the Ender 3 frame with 2020 aluminum extrusion. The holder mounts directly to the 2020 profile using standard T-nuts and screws, no frame modification required. Suitable for Klipper, OctoPrint, or…
Modified in Windows 10 3D Builder, made the 2 slots for the HDMI/Power Plugs wider as the provided ones were way to narrow. Added cut-outs for less material use to the main body. Made the clip more flexible and replaceable, because mine…
box for redmi air dots 2. For closing the box you have to put a magnet ball in the little hole at each side of each piece (4 magnets) and glue the part called iman to the ball.
Case for a HDMI breakout board. I use it to connect to DDC/CI. Needs 4 M2*8 Screws and M2 heat-set inserts.
you put this on your badminton racket for extra weight
the original clamp plate for Klippermate machine is not convenient when mount/unmount the racket the distance of the top and bottom of racket is secured by bottom of the vertical beam, the problem is after stringing is done, the racket…
Really liked the project of deposition sound https://www.printables.com/model/853874-fdmgeo-loudspeakers-by-deposition-sound but I wanted to have the speakers more on ear level and reduce the needed space in combination with the amp, so I…
I initially tried printing them using a 0.25mm nozzle and a 0.1mm layer height, and while they came out perfect looking, they were blocking a lot of the light. That's when I realized that I should go the opposite way, as a trade-off, and…
Add a bold, modern touch to your home décor collection with this Minimalist Ribbed Vase Digital File. Featuring smooth organic curves and a stylish ribbed texture, this CORNER LESS design is perfect for contemporary interiors, decorative…
This handle has more space then the original with a rounded section for the fingers.
Very good instructions from Dave Wilson. Thank you. https://www.printables.com/make/2339640?comment_id=2339640
Ich habe mir auf Amazon einen kleinen Mülleimer fürs Badezimmer gekauft, den man an der Wand befestigen kann. Der Deckel öffnet sich mit einer Feder, wenn man einen Hebel herunterdrückt. Leider war die Arretierungsnase, die den Deckel…
Uploading here as it took me a fair while to find it! Useful if/when moving a DCHDMI enabled console from one shell to another and need to drill a new HDMI port opening. This block is for the original DCHDMI board. I believe it is also…
This is the Assembly tool for squaring the frame during assembly. Some kits were shipped without the laser cut jig. I have included the original STEP file, as well as an STL that has been trimmed to fit a Bambu X1/P1 printer. I printed in…
I wanted some wider feet for the adjustable legs on the DMC Mini Mill. Suggest printing them in TPU (60D) 6 Walls, 4 Top/Bottom Layers 25% (3d honeycomb) infill
Breakout box for four DMX signal lanes from Cat-cable. This box is specifically designed for DMX (no shielding, only outputs) with 3 pin and 5 pin per signal lane. All locking hinges are flat to housing outlines. For assembly you need 8…
The DXF/PDF file serves as a template for cutting out the body from wood. In my case, 20 mm thick. The DXF file is intended for a CNC milling machine. I built one myself. The mounting holes (4 of them) are arranged so that you can mill…
Badminton Stringing Machine Side Support need M8 bolt without head
This is a plunger for the 3M DMA 50 dispenser. This dispenser is made for the 3M 2 part adhesive Duo-Pak cartridge. With this plunger, the 3M dispenser can dispense Loctite 50mL (50g:9g) SEMPAK cartridges. I printed in PETG, 0.4mm nozzle,…
Moved the display to the front when Clicky-Clack Door is installed. Otherwise parts of the display are invisible below the new 2020 profiles of the door. Add an extra 1mm to ensure the door can move freely.
Better stars for less drooping first layers on the snowflakes. Box is scaled to 150%
Print the mesh flat and then use heat (heatgun/hairdryer) to carefully wrap it around your wrist. I have posted 2 sizes of mesh depending on how big your wrists are. The rune stone fits into both. I painted mine with acrylic paint AFTER…
UPDATE: added the mounting plates This is the Thai Makerspace pipe clamp I referred to: https://www.thingiverse.com/thing:3161549 although I use this one for light jobs like this: 25mm Pipe Clamp This case was specifically designed for…
I wanted a nice and rugged enclosure for a Wemos D1 Mini that can control DMX fixtures via ESPHome/HomeAssistant and does not have to be powered directly from the ESPs USB port which breaks easily. So i created this box which holds a cut…
This is a simple line art Christmas tree ornament I made depicting the iconic Armenian monument titled “ We Are Our Mountains ”. It is also endearingly called Tatik yev Papik (i.e. Grandma and Grandpa) by the locals. Please see here for a…
Cool case for your NerdMiner running on a LilyGo T-Display. This is my very first design ever! It's a tight so be careful not to break the reset button on your T-Display. Model doesn't require any screws.
This is a line art Christmas tree ornament I made depicting the iconic Armenian monument titled “ We Are Our Mountains ”. It is also endearingly called Tatik yev Papik (i.e. Grandma and Grandpa) by the locals. Please see here for a…
This build requires ¾" PVC pipe. Height wise, wing it. The total height of the staff is a few inches taller Caitlyn is (who is canonically ~6ft). I'm much shorter than that and trimmed my PVC accordingly so the top of the staff reaches…
This model was originally uploaded as an STL provided by @Hi_Im_Dave . It was a near perfect fit. I took it into fusion to add add a custom designed brim/mouse ear and then i noticed that the model itself had a lot of issues. In fusion I…
15mm base with a hole for a 5x2mm round magnet. designed to print well on an FDM printer without supports. .2mm nozzle recommended
15mm base with a hole for a 5x2mm round magnet. designed to print well on an FDM printer without supports. .2mm nozzle recommended
