Bird cage links for Grandma
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My Grandma asked me to make a set of toys for her bird
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 139
- Wydruki
- 2
- Wyświetlenia
- 869
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My Grandma asked me if I could make links for her bird to play on, so I designed these in FreeCad. I made four basic shapes that use the same connection point to add a little physical variation. I exported the files from FreeCad, sliced them in PrusaSlicer, but they looked way too large during the print. So I stopped that print, scaled them down 50% in PrusaSlicer, then exported them from there. I re-sliced them and printed all four in a batch. I printed that batch five times in different colors of filament.
The links all have a opening to connect them together. There needs to be a little flex as they are put together. I printed in PETG, but PLA would work perfectly too. I tested the links on my dog's box to make sure they wouldn't slip off before giving them to her. When I Facetimed with her, she said they work perfectly and her bird loves them.
Files included:
- BirdCageLinks-TriangleLink.stl
- BirdCageLinks-SquareLink.stl
- BirdCageLinks-HexishLink.stl
- BirdCageLinks-CircleLink.stl
- BirdCageLinks.3mf
- BirdCageLinks_0.8n_0.55mm_PETG_MK3S_19m_ApproxCost0.57.gcode
- BirdCageLinks.FCStd