Vertical Axis Windmill 02
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Windmill / wind vane / wind tubine for a garden installation
- Ocena
- 4,5 / 5
- Polubienia
- 57
- Pobrania
- 461
- Wydruki
- 3
- Wyświetlenia
- 1443
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to do some experiments with wind turbines of various types and then
I designed these windmills for a simple installation in the garden.
They are designed to be inserted in an aluminum rod Ø8 (usually Ø7.8/7.9mm)
Dimensions
External Diameter Ø96 mm
Height 100 mm
Internal hole diameter Ø 8.10 mm
This type of wind blade needs sustained wind to rotate
Works even if horizontally installed
I printed it at 0.3mm layer height, with 2 perimeters and no infill for lightness purposes,
I also printed it with supports only on the upper arms but I lowered the speed as it was going up to the higher levels to avoid vibrations caused by the moving bed.
have fun