170 modeli
Overview on project This is part of the Weather Station One project, a complete and modular weather station. The design of the system has been driven by a number of requirements: collect all common weather channels including temperature,…
Updated after a sugestion from Ghe.leguen made a single shafted version avalible so the bottom spinning wheel will not interfere with the vane. I now have a few build options: A single part vane you will need a buildplate of atleast…
Managed to get this to work, which was cool. Main and tail rotor gearlinked, 1:2 ratio. Print in whatever, this one in PETG. A 608 bearing would be desirable for the pedestal, the other 4 could be 608s, but I used the printed…
Easy to use fletching jig! Insert your arrow with its nock in the tube trace the lines qith a pen, and you are ready to fletch your spiral vanes. Note: two models available one for small diameter arrow (ie: skylon paragon…) and another…
Wind vane attachment for WeatherFlow's WEATHERmeter . A single 608 bearing (22mm x 8mm x 7mm) required for assembly. Base has standard ¼-20 threading for tripod mount. There are two base models, one where the top peg (that goes into the…
Use case Shows the wind direction precisely, even if mounting pole is not perfectly upright. To achieve this, the vane and the counter weight are carefully balanced. Printing Print all parts in the uploaded orientation. To achieve a very…
All the hardware i will be using is necessary for the stock version. Though you can modify the parameters to fit your screws and bearings. I opted to use bearings since it makes the whole assembly pretty much silent. It is also very…
Fletching Jig for 3 vane arrows. I need a true helical jig and wanted it to be small enough to pack away. Uploading full Fusion 360 file for you to play with parameters (in images). I have added files for 4" vanes, 0.2875" shaft, 4 deg…
UPDATE: the old design is not balanced, when the boat is lopsided it swings to one side... A new version is uploaded A small wind vane for small sailboats, I needed one for my Pouch Faltboot. It can be quickly attached and detached so…
Korouhvička s ložisky. Body-B tisknout full z důvodu přibližného vyvážené s Blade. Blade tisknout 0.2 mm vrstvy, 4 spodní a 4 vrchní a mezi nimi výplň 40%. Blade a Body-B lepit. Stejně tak Body-A a lopatky. Použit šroub M8x100 (zkrácen na…
Hey we've got to have tokens now. You can use this! Should work however way you want to print it.
What about a 1 hour project? Print the wind vane!!! Watch build video ( and subscribe to support me ): https://youtu.be/wLRc11sCMeE Materials needed: 1 cutter plier (for 45 degree cut) 3,5-5cm of filament (for the axle) lighter (just a…
This is a Rooster Vane from few parts. You could use some Loctite glue, especially for gluing the rooster and the rooster holder. One of the variant I made is with holes - you could use some filament with glue. The base I made in two…
Garden wind vane featuring 12 blade (sun ray pattern), horizontally mounted propeller with blade circumference ring and tail fin to enable self orientation to the wind. Modular design to enable easy sub part replacement and build…
Spongebob Cup for being advaned stupid To Annoy your friends/students s.o. You can give it as a cup for being stupid. Remix of " https://www.thingiverse.com/make:564965 " Print instructions Scale the Model as you like, Split the Model for…
A simple adapter to allow you to mount a 76mm/3" intake/filter onto a Bosch flapper/vane-type airflow sensor with an ~82x37mm bolt pattern, as found in many late 80s to 90s cars such as BMW E30/E36, VW Golf Mk2/Mk3, Mazda MX5/Miata…
Für Schäfte von 4,5 bis 8mm Außendurchmesser Man benötigt die base, eine cap mit dem Außendurchmesser des Schafts (nächste Größe) und drei Inserts mit dem gewünschten Winkel (0°, 1°, 1,5° oder 2°) Der Bajonettverschluss funktioniert am…
Needed: 1 X 6700RS bearing [10 x 15 x 4 mm] 2 X M3 countersunk bolts with nuts
Weather vane 2. Printed form PETG. Need 2x screw M8x100, 3x lock nut M8 and 4x bearings 608ZZ (ABEC for in line - bought in sport shop). All parts printed full infil (better for point of gravity) with 3 perimeters and 0,2 mm layers. Part…
Weather vane to determine wind direction. To fit AS5600 magnetic rotation sensor and 608Z bearing. Hub is made up of four parts: -Cap to hold bearing -Body to house AS5600 sensor -Base to attach to substrate with hole for cable -Cover to…
Used to mount a Kestrel 5700 to a tripod for continuous wind adjustments. Kestrel slots into hold and hold securely, also has a hole on the bottom to route a string where the attachment point is on the Kestrel. Uses a 608 2RS bearing.
Add some epic ro your garden with this weather vane in the shape of a medieval dragon holding a flower. The flower is also a functional windmill. This weather vane is meant to be installed on a wooden pole. The model in the picture was…
This is a simple Weathervane for Kestrel 5700 Fully inspired by https://www.thingiverse.com/thing:2444368 changed to use cheaper and highly available materials. Changes: Hole is designer for 6mm x 6mm stick (highly available in my area)…
Please let me know if you have any trouble with this! This was a first attempt there are definitely things to improve, so remixes welcome! I have not had a chance to test in different wind conditions, so YMMV! Printing: Consider adding…
Impression en PETG recommandé, remplissage 20%, pas de support
A weather vane with an integrated decorative toroidal windmill. Needs a couple of 608 bearings. Designed to strap to a fence post with a couple of tie wraps. I printed all four pieces with supports using PLA+ and it has been happily…
Video of it in action: https://i.imgur.com/TIBUhLD.mp4 UPDATE: I have added a PDF with assembly instructions. This is my attempt at a whirligig / windvane / windmill thingamajig which is modular, meaning that you can swap bits in and out…
Simple Arrow Fletching Jig for putting on 3, 4, or 5 plastic arrow vanes on a modern carbon arrow. This is straight on alignment, and does not apply a left or right helical. See different models for correct arrow size, should fit Standard…
The original propeller of my wind vane broke. I designed this one as a replacement. It uses a 608 bearing so it can be attached by a m8 screw. Print instructions The print should be paused at 13.4mm to embed a 608 bearing. It needs a…
This is a weather vane for a WeatherFlow Precision Shooting Weathermeter. This mounts to a ¼-20 tripod mount. I also included a pdf file for the spindle if you wish to make from AL or other material. Note: I did not model the ¼-20 threads…
Originally published here: Gravity Falls vanes by tato_713 - Thingiverse . For the more detailed models clic here. This is, as accurate as I can do it, the vane that appears in the Gravity Falls intro, and through the whole series as…
Wenn an einem Armbrustbolzen eine Feder (Vane) beschädigt wird, ist oft der ganze Bolzen unbrauchbar. Diese 3D-gedruckte Feder ist als schneller, einfacher und kostengünstiger Ersatz für kaputte Original-Federn gedacht. Ich habe sie…
All parts print easily without supports, except the main rod. Once you remove the supports, make sure that the cylindrical part is smooth. To assemble this wind vane, simply stack the parts on top of each other. Double check the…
this part was inspired from the movie Wreck it Ralph, it was a nice gift designed for a friend. it's easy to print but it's a bit hard to paint. Category: 3D Printing
Print files and Fusion 360 project to make a weather station. It will need an ESP8266 pro to log stuff. The pro is required as it has an external antenna. It all clamps to a 25mm aluminium pole. The raingauge is a tipping bucket type - it…
Adorno de bola de Navidad con el nombre de Vanessa (doble S). También disponible en: Thingiverse: https://www.thingiverse.com/thing:6383871 Cults: https://cults3d.com/:1650608 Ejemplo impreso en PLA efecto plata.
This is a combined arrow nock and plastic vanes set that can fit on the end of a shaft. This is a nearly exact replacement piece I made to put on the end of an arrow for an old beginner archery set I have, so I am unsure if it works with…
This is a fun little print that simply slots onto your extruder gear…knob…axle… thing. It helps you visualize when the printer is extruding, how much it's extruding (judging by length of spin) and is just a fun little accessory for any…
This is a whistling vane for an arrow. It is designed to fit an ACE (5mm diameter) but should work with other sizes to be honest. They make a pretty good whistling sound when fired over a decent distance (otherwise the bow noise is…
This wind vane responds quickly to changing wind conditions. It uses ball bearings with acetal shells and stainless steel balls, and needs no lubrication. I have used PLA and it has survived for several years and is still going strong.…
Hardware you need: 22 M5 X 20 mm bolts 2 Skate roller bearing (608 size) 2 bars 15 mm diameter. Minimum length 300 mm. Support is designed for a 35 mm diameter pole. Anemometer cups: glued to the rotor arms. Better to be printed upside…
Turn the Vane 5° for standard sized print bed. Use UV-Stable Material with good abrasive characteristics (e.g. PETG) If you want to use this on a boat Mast, consider that the colour you choose should be seen. Glue together the Base and…
I combine the following two models and build a axe model to mount the dragon weathervane on the top of a bird house. Source: https://www.thingiverse.com/thing:928309 https://www.thingiverse.com/thing:2561125 (Dragon) Print instructions…
Just a simple model for a necklace charm of my 2 favorite bands. Logo designed and created by me. Still a work in progress. May need to be resized depending on newds.
Print with whatever material. No supports needed.
Windvane for splash sailboat. Universal windvane fitting. Print with support, i used organic wich works best. (print upright) 0.16mm layerheight 215 °C first layer 210 °C rest layers 60°C bed temp 0.4mm nozzle 20% infill (preferably…
This 3D model was generated with the help of AI but was fully edited and rendered by me in Cinema 4D. A stunning 3D printable model of a traditional Indonesian mask, inspired by the sacred art of Balinese and Javanese cultural heritage.…
Upgrade your school’s mini Farol do Saber with this sturdy and charming Cock Weather Vane Replacement . Designed to replace fragile wooden vanes, this 3D-printable model adds a touch of whimsy and functionality to educational spaces.…
1 X bearing 10 x 15 x 4 mm 4 X M3*40 countersunk bolts with nuts
Sunday afternoon project. Remix of @pachek's weather vane. So that it uses the popular 608 bearing (used in skateboards, printing parts, etc). Thank you @pachek for including the STEP file (I wish more people will do it). As I stay in an…
combined a 40mm to 30mm adapter with an included vane
Design The tube end ring is combined with the secondary mirror spider. The mirror holder is centered by design, it is not possible to adjust the center position of the mirror holder and therefore the mirror. The standard secondary mirror…
Black Sails - Captain Charles Vane - 2014-2017 3D printable model.
An NPC from Tomb of Annihilation. This is a relatively simple model for an NPC that draws in the party to the adventure. I didn't find a lot of good examples for Archmages or older/retired adventurers like Syndra so I made this one. Could…
Stall Vane safety cap to prevent the sharp metal of the stall vane actuator from injuring a person. A "Remove Before Flight" can be added to provide additional visibility when installed. Designed specifically for Van's Aircraft RV-12.…
Bring a touch of classic aviation to your garden or rooftop with this dynamic biplane weather vane. Fully 3D printed, as shown in the image sequence, this model is designed to rotate smoothly to indicate the direction of the wind. The…
Detachable windvane to make printing fast and less waste materials from supports
Design The tube end ring is combined with the secondary mirror spider. In my opinion, it makes no sense to screw on the tube end ring and also the spider for a 3D-printed part. The mirror holder is centered by design, it is not possible…
Just add an M5 nut on the back. Don't print in PLA, it will melt inside the car on hot days, try ABS. EDIT - I added another file with slightly different measurements that works better. You may have to fine tune the fit with a file/dremel…
print as they are 5.1mm holes for 5mm rod move pivot along the rod to it is balanced. longer this rod bar is the easier it turns in low winds start with elbow to finger tip 500mm i added a single 4mm ball-bearing on top of rod u put in…
This is a concept of a Rotary Vane Engine I've seen on YouTube before. I think this engine has a lot of potential in the future, as seen in Driving4Answers video. This has NOT been printed or tested in real life, only modeled. If you…
Magnetic Wind Vane for Arduino / AS5600 A simple and reliable wind vane designed around the AS5600 magnetic angle sensor. No potentiometers, no contact wear — just a magnet and a sensor giving you clean 0-360° wind direction readings over…
Porte-clef plaque d'immatriculation "CARAVANE" à imprimer avec deux changements de couleurs à ⅓ et à ⅔ de la hauteur. Blanc puis bleu puis noir. Modèle original inspiré par https://www.printables.com/model/221060-numberplate-keyring
Blank model of Ludodg's vane holder for making new holders for various vane shapes. Includes .Step .F3d and STL to import into your modeling software of choice. Changelog V5 SpinWingHolderV5.f3d has added parameters for the clip overall…
This is a replacement Vane for the turbine drive for the Hayward The PoolCleaner 2 Wheel Suction Cleaner. This may also fit the 4 wheel version also. Turbine, 6-Vane Kit - PVXH038SA This is #2 on this diagram (Vane ONLY)…
I designed this duct to fit a 40mm fan on the e3d hotend heatsink (fits V5 and V6, bowden or non). I had used a similar design for several years, but it had some quirks that were annoying to deal with. I also learned some interesting…
Cafe Alpha's original fish vane 風見魚 in Japanese manga ヨコハマ買い出し紀行 (Yokohama Kaidashi Kikou) It's a simplified desktop version that does not spin in the wind (sorry). The pattern is based on the Hitoshi Ashino Art Book instead of the manga…
support jauge gaz pour camping-car ou caravane Category: R/C Vehicles
This is the beginning of a growing list of different spider vanes for the hadley telescope. I plan to add many more variants going forward. Spider vanes hold the secondary mirror in place in the center of the UTA assembly. The shape,…
The individual parts are glued. Do not glue the stand with the rod.
Remixe en une pièce du coq 3417624 --- Si vous voulez me soutenir pour mon travail ou juste si vous êtes sympa, vous êtes libres de faire un don sur ko-fi If you want to support my work or just if you are nice, you are free to make a…
This guy appeared first in Mandalorian SE03EP01. I sculpted him on my iPad Air 4 (2020) using Nomadsculpt. First it was planned to be a bust, without hands. But in the end he got some personality with the hands and the pose. Hope you like…
Turning vane for RB14 similar to 2018 Spanish GP. Pictures are after some rough post processing. You must take the barge board off prior to removing the turning vanes to have the right layering on the aero bits. if you hate this you can…
Źródło oznaczyło ten model jako treść 18+.
A weather vane for the street on a bearing of the brand 608, measuring 22x8 x7. The model is a national team. It can be assembled on glue. It is placed on a bolt or stud of 8 mm. The model has been printed and has been in operation for 2…
Repair part for car vaccum pump OEM 8E0927317. Print Settings Brim: No Supports: No Infill: 20 Filament: Any PETG Layer Height: 0.15mm
Small vane for house model. I designed it for this house: https://www.printables.com/model/200529-victorian-country-house It's very small, so I designed it to not require any support, and to be easy to assemble.
I made some vanes for archimedes wind turbine . Only as 3mf- and stl-Files. The 3mf-Files are made for PrusaMK4. Update: 2024.08.14 Yin Yang Cat Update: 2024.08.18 Sterntaler V02 Have Fun
This isn't really a remix, it's a bracket to hang the snoopy wind vane from Chipen83 on thingiverse: https://www.thingiverse.com/thing:5189130 The website wouldn't let me note it as a remix for whatever reason, so it's not shown that way.…
Technically speaking, this was modeled after a traditional one-handed Javanese Kris sword. But to my knowledge, a double handed version never existed in real life and the weapon was a symbol of societal status. I liked the curves, and one…
Bettstangenhalter für Rapido Export / Record / Confort. Masse gemäß Originalteil.
🇫🇷 🥐 Ce modèle est une proposition de remix du projet proposé par @bzzzzzz sur printables.com : https://www.printables.com/model/976722-wind-vane-pumpkin-cat J'ai fabriqué la V1 de ce modèle et j'ai rencontré plusieurs problèmes : La…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** This vent flap includes vanes that direct heated air…
This is a weather vane for a colleague. It is printed from PET-G, painted, assembled together and installed on a cat house. Additionally, two bearings and a shaft were used Print Settings Rafts: No Supports: No Resolution: 200 Infill: 100…
A simple wall hanger based on the weathervane from the Taskmaster house. I used double stick tape to hang it on my wall. Print Settings Printer Brand: Robo 3D Printer: R1 ABS + PLA Model **Rafts:** Yes Supports: No **Infill:** 20%…
Weather Vane to mount on a post or horizontal surface. To maintain a good balance I used 2x bearings (608ZZ ID 8mm OD 22mm H 7mm) with a spacer in the middle and then locked into place with spacer. You can use 3x bearings if you wish as…
Cafe Alpha's second fish vane 風見魚 in Japanese manga ヨコハマ買い出し紀行 (Yokohama Kaidashi Kikou) It's a simplified desktop version that does not spin in the wind (sorry).
Someone requested the CAD files from my video … So that's why this page exists (: The video in question: I have put no work into making this understandable or easy to print or whatever. It's just the files straight of my computer. Do…
My vantage vue wind vane suffered damage when I took the unit down for maintenance. I looked at the Davis site for a replacement and was reluctant to spend $25.00 with shipping. I found morrowm's Wind vane with a Freecad file attached and…
Windvane chain linkage My boat did not have a nice way to attach my Aries windvane to the tiller. One of the previous owners put a long bolt through the tiller and you where supposed to put one of the chain linkages over that. I did not…
weather vane record adapter.
Arca clamp bearing connector for Kestrel weather vane
This is an adapter so you can put an ordinary vane in the bow of your ILCA dinghy (LASER). It is required that you print this model with at least TPU or a similiar flexibility filament, if not you may not be able to fit neither the Vane…
A little weather vane made out of circles. You will need: Minimum 200mm x 200mm Build Plate x1 6001 Ball Bearing Glue Assembly: Print the two sides of the Vane Glue the two sides together Print the base Insert 6001 ball bearing into the…
Picture is self explaining ;-) Made for a fun of my small daughter. Větrník, stačí špejle a provázek. Resolution: 0.2mm Infill: 20% Filament: noname,found in my rack ;-) PLA
This is design was inspired by Verus Engineering's “ Turning Vane Kit - Ford Mustang Shelby GT350” which must be used with their “ Flat Underbody Panel Kit - Ford Mustang Shelby GT350” and “ Fender Evacuation Kit - Ford Mustang Shelby…
Spare wind vane assembly for the anemometer of the TFA Sinus/Nexus weather station. Suggestion for printing: print on PETG.
Fermeture de remplacement pour fénêtre de caravane
![#0142 [REMIX] Vent Flap with Vanes](https://media.printables.com/media/prints/786142/images/6550246_591a8d6e-71e2-4707-b1a8-39341744e4dc_4dc6620f-8e79-4a2e-9eab-16168f7eba2e/rl-20231219-012.jpg)
