1 / 2
Weather vane with classic Rooster and animal direction markers — zdjęcie 1
1 / 2

Weather vane with classic Rooster and animal direction markers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Completely printed except the PVC pole and a single screw

Ocena
0 / 5
Polubienia
15
Pobrania
166
Wydruki
1
Wyświetlenia
1255
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Please let me know if you have any trouble with this!  This was a first attempt there are definitely things to improve, so remixes welcome!  

I have not had a chance to test in different wind conditions, so YMMV!



Printing:

Consider adding some higher density infill or thicker walls for the top pole of the base.

Scale the vane top itself in the X and Y dimensions to fit your print bed, mine is 210*210, I'm not sure smaller or larger will work.  Scale the arrow front weights in X and Y by the same amount.



Artist Statement:

This project started because of the rooster on top. 

They constantly watch over their flock for threats from all directions, rarely getting any help, often hated, rarely recognized, never sure when they'll be eaten or sacrificed... I thought it would be cool to do some kind of art piece about it, as a protest for all those who work without recognition.


The four direction markers all have an animal, in true 90s maximalist style.

As the East is often associated with the element of Air, logic, and clear thoughts, an eagle sits and watches over that direction.

I almost thought I'd have to redesign, as suitable free silhouettes are hard to come by, but I eventually found one from the amazing Rita Nygaard on her site: https://www.clipartqueen.com/about-clipartqueen.html#who-is-clipartqueen . 

Please note that her work is not Creative Commons and has some usage restrictions.


For the South, the direction of Fire, I chose a horse, because of the traditional association in Feng Shui, the firey and energetic image of galloping at full speed, and a few historical sources connecting the Southern Cross to centaurus. 

The silhouette was provided by Johnny Automatic and is public domain(https://freesvg.org/horse-silhouette-vector).


For the West, the direction of water, and in some cultures also the direction of the end of life's journey, the salmon seemed like the perfect symbol, especially as they can leap into the air and so don't look out of place hovering in silhouette. 

The original image was from Ryan Lerch at freesvg(https://freesvg.org/chinook-salmon-vector-image), filled in using GIMP, and traced using Inkscape's Trace Bitmap feature.


Finally, a bear curiously observes the direction of North. The etymology for the Arctic Circle apparently derives from "Near the Bear", and the constellation Ursa Major can point the way to Polaris, the current northern pole star. 

The original image is from(https://freesvg.org/1536170975)


Atop it all is a vane featuring a rooster(Apparently derived from the Ottenbach coat of arms: https://freesvg.org/rooster-silhouette-2) atop an arrow drawn directly in FreeCAD.

Labeling each direction is a cutout in the font Emily's Candy(https://fonts.google.com/specimen/Emilys+Candy?category=Display) from Google Fonts.



Assembly:
 

You'll need a lot of super glue for this!!  Super glue is thin and dries fast, it's best to assemble, then add glue to the joint, and if there is any wiggle, hold it in place to it's straight as it dries.


There are no rolling element bearings or anything used here, it is completely printed. Ball bearings were not used in historic weather vanes, and I've followed the common historical method of resting on a single pivot.


Warning! There are order-dependent steps! Read before you glue anything!

Glue the arrow weights to the front of the vane.


The Retention Ring slides onto the Upper Pole, screw threads side down, After that the Rain Shroud slides on, with the wider side down.  None of those parts should get glued at all.


You will need to find the proper balance point for the vane in the Upper Pole. Glue this AFTER you put the retention ring and rain sheath on!!!!  One you add glue, hold it or clamp it so it is straight up in the slot.  It is a bit loose especially after sanding the vane.



The upper wear surface goes up into the upper Pole, with the dish side down. The lower wear surface goes in the top of the base, with the round bump up.

Then the upper pole slides over the top of the base, and you screw down the retention ring.


The 4 direction markers go in the slots in the arms, then the arms go in the base, and the base goes on top of a 1/2 PVC pipe, with a single screw of some sort to secure it.  You may need to sand or clean up the inside to get it to fit on the pipe.

Check this fit before you start assembling!!

 

All the sanding should be done before assembly, the painting and urethaning after.

 

Once the paint is dry, unscrew the retaining screw, and heavily grease the cup part of the upper wear surface, and the top pole part of the lower bearing, with a light grease or maybe an oil.  I would stay away from WD40, no lubricant at all will probably be better than that stuff.
 
Ideally, I'd say you should use some slip 2000 EWG(https://slip2000.com/products/ewg).


Lessons learned:

• PrusaSlicer can compute center of mass for you.
• This will be different due to infill patterns than what you would expect for a solid model
• Weather vanes traditionally do not use ball bearings
• M33 printed screw threads seem to be very reliable
 

Tagi