Wind Vane for AS5600
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wind vane with AS5600 magnetic encoder, 0-360° I2C output. No potentiometers, no wear
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 292
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
Magnetic Wind Vane for Arduino / AS5600
A simple and reliable wind vane designed around the AS5600 magnetic angle sensor. No potentiometers, no contact wear — just a magnet and a sensor giving you clean 0-360° wind direction readings over I2C.
The vane mounts on a 10mm carbon fiber or aluminum tube and spins freely on a small bearing. The counterweight at the front keeps the assembly balanced so it responds to light wind without needing to be perfectly level. The wing size can be scaled up or down depending on how sensitive you want it to be.
Designed for use on autonomous boats, weather stations, or any project where you need reliable wind direction data outdoors. Pairs directly with an ESP32 or Arduino over I2C. The housing is compact and the whole thing prints in under 2 hours.
You also need:
AS5600 magnetic encoder module
Small diametrically magnetised magnet (6x2mm)
10mm tube (carbon fiber or aluminum)
2x 608 bearings
M3 hardware
Part of the SAILONE project — an autonomous sailboat being built to cross the Atlantic.