Liczymy pasujące modele…
Experience the thrill of supercar engineering with this 3D printable STL model of a McLaren Sports Car. This aerodynamic performance model is perfect for automotive enthusiasts looking to display the sleek design and exhilarating speed of…
As the original, this remix is inspired by: Stealing Noctua's quiet airflow mod Compared to original design, this is more aerodynamic and optimized for radiators. Use auto-orient to get better face on the print bed if you're not sure. I…
Aerodynamically shaped pack for bicycle seat post. It is designed to fit the BÜCHEL 51254650 lamp. Any similarities to other models or products available for purchase on other platforms are purely coincidental and due to the aerodynamic…
This is my V3 hand-launch glider , developed through multiple design iterations with a focus on real-world flight performance, stability, and ease of printing . Compared to earlier versions, V3 introduces meaningful aerodynamic and…
This is a jig designed to print on a Prusa MK4 for turning kapton tape and sewing thread into identically sized, precisely spaced tufts for aerodynamic testing. The spacing is adjustable but may cause some issues in the Solidworks…
Do not use this helmet for sport perpouses it is ver DANGEROUS to use 3d printed helmets
if you're here, you've seen the YouTube videos or maybe you bought the book. Either way you're cheap like me and decided you don't need all that fancy metal when plastic do job fine. This one is full featured (vs the version requiring a…
A superior aerodynamic shape for a cowl to cover antennas or instruments on the outside of a vehicle or vessel. PAY CLOSE ATTENTION TO PRINT SETTINGS Print Settings Printer Brand: Creality Printer: Ender 3 Pro **Rafts:** No Supports: No…
i have made these Mazda miata mx5 aerodynamic canards for my car to have a little more downforce
This 3D printable part is designed to enhance the aerodynamics of your Honda Civic FL1. By strategically manipulating airflow, this chevron-shaped component contributes to a smoother driving experience. Specifically engineered to be…
A sturdy, sleek and easily 3D-printable mount for Wahoo and Garmin bike computers with integrated mount for lights or action cameras. The mount can be printed with minimal supports and the computer mount is fully integrated in the part…
The flat bed is ready for mounting magnets with a diameter of up to 88mm/m8 or using the side threaded rods m8 on the roof rack. There is a passage for a cable or for mounting POE from Mikrotik in the back. The entire starlink is covered…
TopRC Odyssey Wing Wheel Well Aerodynamic Covers for use with the JP Hobby ER-120S Landing Gear to lessen the impact of drag due to too big wheel wells in the wings when using this weight saving retract set. It is a snug fit when you…
TopRC Odyssey Wing Wheel Well Aerodynamic Covers for use with the JP Hobby ER-120S Landing Gear to lessen the impact of drag due to too big wheel wells in the wings when using this weight saving retract set. It is a snug fit when you…
I wanted more control over downforce on my Arrma Limitless as I use it as both a drift car and a speed run car, and the only commercial kit I could find was way too expensive. So I decided to do it myself, and I made this kit which…
Fishing float with indentations. Benefits of having dimples: Can be thrown farther (less drag) Gets pushed less by wind once in the water Looks cool Open-source, fully customizable, parameterized, source code file included. Created using…
These are fenders for your pinewood derby car. Cut your block of wood, install the wheels and super glue these to your car, being careful to make sure there's enough room for the wheels to spin freely. Enjoy!
This is a remix of an awesome design by @benproductions on thingiverse. All I did was edit the seat post adapter in order for it to be able to fit my 2012 Cervelo P2. I will attach the onshape files I used to create the seat post below so…
Are you tired of your graphics card sagging under the oppressive weight of, well, existence ? Do you lie awake at night, tormented by the phantom pains of a GPU slowly submitting to gravity's cruel embrace? Fear not, for a new dawn of…
Experience the thrill of supercar engineering with this 3D printable STL model of a McLaren Sports Car. This aerodynamic performance model is perfect for automotive enthusiasts looking to display the sleek design and exhilarating speed of…
Aerodynamically designed ducted EDF motor mount for the “40mm Hobbyocean EDF”. Designed for LIDL chuck glider to RC conversion, but suitable for other models as well. Print without supports, optionally a brim if you prefer. The motor is…
As the original, this remix is inspired by: Stealing Noctua's quiet airflow mod Compared to original design, this is more aerodynamic and optimized for radiators. Use auto-orient to get better face on the print bed if you're not sure. I…
This dart was our team's third prototype. We used physics to make it go wherever you throw it. It is fast, prints quickly, is relatively sharp, flies far and is accurate. Make a foam target and have fun!
Aerodynamically shaped pack for bicycle seat post. It is designed to fit the BÜCHEL 51254650 lamp. Any similarities to other models or products available for purchase on other platforms are purely coincidental and due to the aerodynamic…
This is my V3 hand-launch glider , developed through multiple design iterations with a focus on real-world flight performance, stability, and ease of printing . Compared to earlier versions, V3 introduces meaningful aerodynamic and…
This is a fully functional and working aircurtain design, for the Sovol SV07 3d printer. The design features / improvements compared to the original Sovol aircurtain are: 1. a much wider cooling coverage of the build plate area (almost…
This is a jig designed to print on a Prusa MK4 for turning kapton tape and sewing thread into identically sized, precisely spaced tufts for aerodynamic testing. The spacing is adjustable but may cause some issues in the Solidworks…
Do not use this helmet for sport perpouses it is ver DANGEROUS to use 3d printed helmets
This part fits the underside of the wing on the FMS Futura 64 EDF and covers the exposed aileron and flap servo horns when the landing gear is removed for belly landing configuration. I've also added a matching front skid for those who…
I've wanted a bed scraper that looks a little cooler than the ones you often find. I took inspection from the contours of supercars. The divit in the center is a perfect place for your finger to rest wile scraping.
WIND TUNNEL MODEL FOR DEMONSTRATING AERODYNAMIC DRAG
Mount your O4 Lite Camera with an aerodynamic nose. It is also particularly helpful if you need some more weight in the front to balance the F-01. Note that for this mount you absolutely need a longer MIPI cable than what the O4 Lite…
Finding a mount that perfectly fits the unique aero seatpost of a Pinarello F5 can be challenging. I designed this custom mount to provide a seamless, secure, and aerodynamic fit for Garmin Varia radars (and other devices using the…
It provides a flush, stable grip for your cycling accessories without risking damage to the seatpost profile. Compatibility & Testing Seatpost Profile: Designed for waterdrop / teardrop aerodynamic profiles. Tested Fit: Tested and…
TopRC Odyssey Nose Wheel Well Aerodynamic Cover for use with the JP Hobby ER-120S Landing Gear to lessen the impact of nose down tendency due to the suction of the EDF. It is a snug fit when you remove all excessive glue globs from the…
Ultralight High-Performance Boomerang V4 (No Holes) The upgraded V4 edition of the iconic ultralight boomerang, engineered for maximum flight stability and impressive range! Weighing in at under 18 grams , this high-performance boomerang…
Profile: Standard Quality Filament: Generic PLA Settings: Quality Layer Height: 0.2 mm Line Width: 0.4 mm Walls Wall Line Count: 5 Top/Bottom Top Thickness: 0.8 mm Bottom Thickness: 0.8 mm Infill Infill Density: 20% Infill Pattern: cubic…
Files *_v2.* are for a slightly different design: mainly changes the button and it also has 5degree down angle to have more wings in the camera frame. I use 6 skirt outlines for the button and leave it attached. I glued the button to the…
A few words about the project (joyfully added in the last minute of the Make It Fly contest - still warm files) Two propeller launcher base designs are included - you choose which one to use. For small printers - short toothed bars…
Print it in tpu. Shopping list: Connectors 1.25 mm JST 2 Pin https://amzn.eu/d/7O5Od5k Step-up 0.9-5V To 5V DC-DC https://amzn.eu/d/2N1EUCR Lipo 1S 3.7V 300mAh https://amzn.eu/d/7Odt2Ar v02.test: v0.1 test:
didn't like the valve nut on the curved rim, but without it the valves rattled quite a bit inside the valve-bore. So i made washer that perfectly adopts to the curvature of the rim and since i was already there i made it “aero”…
They work perfectly fine and snuggly fit. My recommendation is to print them using PLA+. My Settings are listed below: Layer Thickness: 0.28mm Infill: 50% - Cross 3D Print time on a Ender 3 Pro with a mainboard upgrade and BL Touch: 11…
Included are 5 simple wind tunnel test articles for the Modular STEM Wind Tunnel , intended for use with smoke visualization to concisely demonstrate the concept of streamlining and show how the wakes behind different geometries can vary…
May work as a push fit, however it is recommended to gluen a spare valve cap into the end of the cover, to ensure it stays on at speed. No liability accepted for any damage caused by the cover coming off during a ride, although this has…
