1 / 5
SV07 aerodynamic Aircurtain with 120mm FAN — zdjęcie 1
1 / 5

SV07 aerodynamic Aircurtain with 120mm FAN

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This Aircurtain design for the Sovol SV07 printer covers the "full" build plate and is for quiet 120mm cooling FAN's.

Ocena
0 / 5
Polubienia
0
Pobrania
10
Wydruki
0
Wyświetlenia
61
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a fully functional and working aircurtain design, for the Sovol SV07 3d printer.

The design features / improvements compared to the original Sovol aircurtain are:

1. a much wider cooling coverage of the build plate area (almost the full printable area)

2. a greatly reduced noise level by using a quiet 120mm Fan (moves more Air at lower RPM)

3. a way more efficient and aerodynamic design (No, "flat wall design")

Note that you should print the Aircurtain out of a thermal stable enough material like PETG, ASA, ABS.. as the lower part of the Aircurtain can be quite low above the heated bed.

Print with 2 perimeters and a 0.4mm Nozzle and 0.2mm layer height (printing with a 0.5mm Nozzle and 0.25mm layer height is also possible). Print Orientation is standing on the 120mm FAN interface - and requires NO supports. The Part is designed to make use of bridging funktionality of FDM printers like the SV07 and this works fine. Re-Use the original sovol mounting screws on the gantry - but be aware that the mounting may requires allen keys with a ball head due to geometrical constraints. Choose a very quiet 120mm Cooling FAN as even the most silent ones on the market offer significant higher airflow rates compared to the annoyingly loud smaller stock FAN.

Tagi