1 / 5
SV07 aerodynamic Aircurtain with 120mm FAN — image 1
1 / 5

SV07 aerodynamic Aircurtain with 120mm FAN

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This Aircurtain design for the Sovol SV07 printer covers the "full" build plate and is for quiet 120mm cooling FAN's.

Rating
0 / 5
Likes
0
Downloads
10
Makes
0
Views
63
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a fully functional and working aircurtain design, for the Sovol SV07 3d printer.

The design features / improvements compared to the original Sovol aircurtain are:

1. a much wider cooling coverage of the build plate area (almost the full printable area)

2. a greatly reduced noise level by using a quiet 120mm Fan (moves more Air at lower RPM)

3. a way more efficient and aerodynamic design (No, "flat wall design")

Note that you should print the Aircurtain out of a thermal stable enough material like PETG, ASA, ABS.. as the lower part of the Aircurtain can be quite low above the heated bed.

Print with 2 perimeters and a 0.4mm Nozzle and 0.2mm layer height (printing with a 0.5mm Nozzle and 0.25mm layer height is also possible). Print Orientation is standing on the 120mm FAN interface - and requires NO supports. The Part is designed to make use of bridging funktionality of FDM printers like the SV07 and this works fine. Re-Use the original sovol mounting screws on the gantry - but be aware that the mounting may requires allen keys with a ball head due to geometrical constraints. Choose a very quiet 120mm Cooling FAN as even the most silent ones on the market offer significant higher airflow rates compared to the annoyingly loud smaller stock FAN.

Tags