184 modeli
Please don't forget to like - I want my Prusameters! 😄 What's new? New Process Preset: 50mms FINE , prints with 0.10 mm layer height. All first layer speeds set to 40mm/s , to make the presets work universal out of the box. If everything…
Here is a bed model and textures for Orcaslicer and Prusaslicer for the SV07 Plus. Also included are json configs for slicer settings for Orcaslicer. “Klipper Detailed” orca profile I use everyday for a balance of speed and quality with…
You can Import my SOVOL SV07 Profile to print fast and with the external fan. The only part I copied from Makersmuse was the start of the external fan. When you create a profile for PETG you should remove the external fan cooling and…
🚨 Latest version will always be found on the OSS Klipper Configuration repo. These config bundles can be imported into SS and PS. Printers SV06/Plus SV07/Plus Features Printer profiles. The best print settings in the universe (yes, even…
Fast Check if your Z axis is stil level with the bed on your Sovol SV06 Plus. I remixed these from the SV06 ones because after homing the SV06 Plus has a different gantry heigt. After homing the printer head and turning off the…
…Please be sure to hit like & post a make, I'd love to see your prints! Print on its flat EDGE as this will provide the strength you need in this orientation, that's important! Don't print too fast or you could pull it off the bed, use a…
Updated 01/28/2024, 28/01/2024 for the rest of the world. I saw a few comments stating that the mounting/starting chain link was causing collision issues with the side of the printer. I went ahead and made some minor changes to the model…
Didn't like the giant printhead housing on my sv07+ but I still wanted to use the factory led for it so I whipped up this bracket on tinkercad real quick to try out, at least until someone comes up with a better one lol added a 2nd model…
Since I don't have a Microsoft LiveCam 3000 HD and only a webcam with ISO 1222 / DIN 4503-1 / 1/4-inch camera thread. I couldn't help myself and built this model. It is further away from the print bed and elevated. Two different ISO 1222…
A few people asked for the model that Sovol provided with the SV07 plus. Has to be printed with supports. It wraps around the ribbon cable where the sticker is then slides onto the X gantry cable mount area, which makes the cable stay…
I'm not sure what the difference is between the Extruder and LEDs on the SV07 and the SV07 Plus, or even if there is one but I think this should fit the SV07 too. But if you want to remove the extruder cover to get a better view of the…
The back piece should press fit into the back of the stock stepper motor. The front piece goes on the shaft. I have not tested this with the extruder housing installed since I run modified cooling. Printed in PETG at 0.2mm layer height.…
Are you tired of your SV07 and SV07 Plus sounding like that old Eureka vacuum that Grandma had? Would you like to be able to actually sit in the same room as your printer for more than 5 minutes without your ears bleeding or going deaf?…
…Please be sure to hit like & post a make, I'd love to see your prints! SV07 pi cooler! The sv07 will run at 60°c at room temperature & over 80°c in a 30-40°c enclosure! This Pi Cooler will take those numbers down 36°c & 54°c…
I noticed that my Sovol vibrated way too much while printing at 100 mm/s or more so I decided to make TPU feet to reduce the vibration. This model once printed will fit snugly on top of the original feet. Made with Fusion360 and sliced…
A 5015 part fan duct for the Sovol SV07/SV07+ that should work with the SV06+. This duct mounts on the front of the extruder stepper motor and will not interfere with the auxiliary cooling fan on the back of the gantry. It also has a…
If you are using your printer sideways, its for ya :P
SV07 Profiles and calibration guide. Black Friday is coming up, and the SV07 is the printer recommendation for those that can't afford a MK4 (yet!). With Klipper and a volcano hotend, it can print much faster than other bed-slingers at…
Bracket to mount the stock LEDs on the extruder with the stock housing removed. Prints without support. Requires: 3x M3x6mm screw 3x M3 nut 2x M3x20mm screw (longer than stock stepper screws) 1x M2.5x4mm screw (reuse the original screw)
Bracket for securing the extruder ribbon cable use 2 m3x8 screws to secure
This is the plate model for the SV07, made for Orcaslicer. I do not know if this format works for other slicers but I have used it successfully with Orca. To import it in Orca, unzip "SV07 220x220 Texture.zip", open your printer settings,…
…Please be sure to hit like & post a make, I'd love to see your prints! The Vortex series grows with Gemini! Print faster with crisper cleaner looking prints! These lightweight mirrored modular pods each carry a powerful 24v 6020 fan that…
There are 4 models. With M3 fusible nut and for screwing onto M3. The sensor now has more play.
This cable guide is mounted to the z-axis and avoids collsions of the cable with other parts (e.g. with the large part cooling fan mounted to the x-axis). No additional cable guide (e.g. at the extruder) is needed to avoid any collisions.…
This is a remix of this file: Flexible flat cable holder Ender 3 S1 Pro by ExpertBG - Thingiverse This bracket holds the extruder/x axis cable in place as it goes up and down the Z Axis. I found the original to work extremely well for my…
Here is my other Upgrade for the Sovol SV07 (Plus) and maybe the SV06 (Plus). This time it's an upgrade for the Hotend. The Fanduct is built in three pieces with easy assembly and connects to the original end piece → so you can print it…
Mounts for Sv07/+ accelerometer to make changing its location easier and faster. Tips and info Both mounts use the same locations and orientations as they would without the box. would recommend printing the “BOTH” file and printing the…
This is a prototype mod to move the heavy filament spool off the top of the SV07 printer, which should improve input shaping results and allow compatibility with using filament driers while printing. This has only been tested on the…
This is a cooler for Sovol Klipper Screen on Sovol SV07 Plus. I dont have any personal experience with non plus SV07 but I do believe the screen and the mount is the same. This model uses the original mount and is connected to the fan…
I have my SV07 in an enclosure and thus have the filament spool mounted elsewhere that caused some excessive drag in the filament path as it passed through the runout sensor. So I made this little bracket that moves the filament runout…
This bracket mounts a Microsoft LiveCam 3000 HD webcam to the base of a Sovol SV07. It uses existing screw holes and screws. Except for the webcam and some cable-ties, no additional materials are needed. Printing print laying on its side…
A mount for the ESP32-CAM module case thing:6295703 that slides onto the Y rail tensioner. 12-5-23: added design for SV07+ based on feedback from a maker -thanks! Note: use this camera screw adapter (1/4" 20 tpi) if you have a web cam…
This here is a great camera holder! This fits the SV07+ and maybe the SV07 non + variant. This is similar the the one I tried originally but it has so many little issues I decied to just design this one from the ground up. This model will…
The original magnetic probe holder for Sovol SV07 and SV07+ printers does not allow the height of the probe to be changed. I've therefore designed a replacement part that allows this height to be adjusted, so that longer hotend assemblies…
very loud aux/part cooling fan on sv07plus covers only center of the bed... I made a wider one that accepts 2x 120mm fan so you can use 24V 120mm fan from sunon or noctua and have much higher cooling power with way less sound than…
Modelled in Solid Edge 2022. I'm printed it with my Sovol SV07 plus. Fast, 16 min long print with orca slicer and 0,2 layer height.
This is my own, simple creation of heat sink Fan Duct. It's an upgrade from the stock 4010 blower to a 5015 blower, to prevent heat creep on Sovol SV07/SV07Plus and maybe SV06/SV06Plus. I printed the duct in ABS, but PETG or maybe PLA…
Bauteilkühler für den Sovol SV07plus.
What is this? These printed parts let you install Prusa's MK4S 5020 blower part cooling fan shroud - a slightly modified version, that is - on the Sovol Planetary tool head “high flow” variant as shipped on the SV06 Plus and SV07 series.…
Sick of messing with the annoying foam inserts to organize the SV07 & SV07 plus drawers? Use this drawer insert to neatly store the tools that come with the printer! It even holds up to 10 extruder nozzles. Don't like the layout I chose?…
Guide with pictures can be found here on my Github: https://github.com/GTreaper/Sovol-Sv06-Sv07-leveling Sovol-Sv06-Sv07-leveling. A guide on how i have achieved great first layers on the Sv06+ and Sv07+. Never try to: Home the printer…
Update(#2) 2024-01-04: Filament guide to be mounted on top near spool holder added. Made and tested by Tomas Olsson. ---------------------------------------------------------------------------------------------------------------- Update…
This small nozzle storage holds 12 spare nozzles. It fits perfectly into the back of the small drawer of the Sovol SV07. Some thoughts which went into this: placement in the back of the drawer is sensible, since nozzle changes are not…
Printed as shown in the file, no supports necessary. Printed at 45° orientation on the bed for faster printing. Esun clear petg with 240° nozzle and 80° bed. Fits stock mounting holes perfectly and uses the same screws. *I have my printer…
I had a disaster where PETG balled up on the extruder and encased my hot-end. This melted the stock part cooling duct… so I needed a replacement. Printing without a duct I managed to print this. This is not tuned in any way other than to…
Mine broke in a printhead crash. Here's a minimalistic design done in FreeCAD. Airflow goes straight to the nozzle tip where it belongs. Print sideways as shown in the screenshot. Print in ABS/ASA or PETG. Reuse all original screws to…
The cable management on the Sovol sv07 I got is very hard to deal with. More than once the massive taped-together cable has gotten stuck in the y-axis. To deal with this I recommend using an xacto knife to un-bind the z-axis cable and the…
easy to assemble and easy to print camera mount for the Logitech c270, c310, Brio100, c505. The current version fits the Sovol SV07 & SV07 Plus but can be modified for other printers. hardware requirements: 1x M5x45 (or longer)
This is a remix that fits the sovol Sv07 and maybe the Sv07+ as well. Friction fit, but you can add a little bit of tape if you need it to hold better. It is inverted, so the image will be upside down, just change it in the…
A simple LED mount for Sovol SV07 Plus. I used an 8mm wide 24V LED strip from Aliexpress and connected it to the aux fan connector because I don't use it. Added a picture of the lightbar connector schematic for redesigning.
Print with supports. Very easy to print. Needs M3 screws and nuts. PLA it's just fine. [bltouch] sensor_pin: ^PD13 control_pin: PD12 x_offset: 29.5 y_offset: -28.5 #z_offset = 0.225 speed: 3 lift_speed: 20 samples: 2 sample_retract_dist:…
After seeing several mentions recently of the ribbon cable on the SV07 being damaged by rubbing against the auxiliary fan, I decided to print rogerquin's cable spine and the adapter for it for the SV07 by Kryby. Unfortunately, the hot end…
The C270 adapter works with the base, screw and nut from this mount design (thing: 6308788) . Print in the orientation shown in the print bed photo. Update 1-17-24: Revision 1 is slightly shorter in depth so the claw on the C270 can close…
Sovol SV07 Plus screen holder with cooling. No need for any screws, or opening original klipper screen. No warranty void. Added a place for 5v 40mm fan (4010), pulling hot air out. Fan is connected by USB cable to klipper screen. Just…
The stock SV07/plus curtain fan sounds like a jet engine on the runway. It's also not very good at spreading the airflow uniformly. This is yet another attempt to fix that. I drew a lot of inspiration from u:Porpoise Hork 's fan duct…
includes optional cable clip, use as shown chop the two sets of wires they sent you with the microprobe to an appropriate length and solder them together or buy a cable with the appropriate microblade connectors. this plugs in where your…
Requires 1 of each model and 1 m3x10 to attach the winding knob to the wheel. Hole in the knob is small enough to lock the bolt at the tightness needed for it to wind easily but not be floppy. Fit on the initial version of the wheel to…
This screen holder is an extended and angled remix of Radzio's screen holder. 2 parts- Glue together with superglue. It allows you to use PGain88's SV07 Plus camera mount while having a flash drive docked to the Klipper screen.
I didn't like how large the extruder cover is for the SV07 Plus but I wanted something to cover the fan and keep the wiring clean and protected. This is similar to the original cover but without the large overhanging part obstructing the…
Made the smaller filament guide first but it i wanted to add a LED bar from aliexpress and the smaller has limited movement freedom when doing high prints. Both can be used with the stock spool holder and feeding from a drybox. Filament…
Stops your small spools from moving around
This is an organizer for the Sovol SV07 drawer.
Recently tried larger prints on wider areas of the bed. Discovered the differential cooling effects of the stock parts fan ducting. This is an insert that goes between the stock rear parts fan (on the X crossbar) and the crossbar. Two…
Just donwload and go to you slicer config, then upload the files.
Since the holder for the flatcable is not really ideal in anyway for the sovol sv07(and possibly SV07+) - i made this design, which holds the flatcable coming from the base of the printer, and pushes the cable upwards to create a simple…
Not satisfied with the curtain fan on my SV07+, I had to come up with something that would actually work. The OEM curtain fan was too loud and caused me countless failed prints due to excessive cooling on the bed causing prints to warp…
After extensive testing. I was able to find all available pins on the main board. I've updated this schematic I've seen floating around. Was not easy. If you are wondering why, well you can add more sensors, fans, physical buttons, custom…
Updated 26/4-25: New version V7 with sleeker design and threads for 6 mm PC4-M6 bowden couples as well as PC4-M10. Also slightly redesigned runout sensor mount to reduce sag. A little kit i put together to remove the spool of the gantry…
***Update 1/24/24*** I updated the Top T-Nut channel design a bit due to clearance issues I was having with a filament sensor case I made. There is now a tab at the bottom for easier removal and the T-nut channel was moved up higher and…
I am slowly replacing each blue plastic part on my printer. This is the front panel, there is no drawer. Uses the same 4 socket head screws as the factory part. I printed this with fewer bottom layers and honeycomb infill so you can…
I created this model for my new Sovol, it is intended to work with any 40mm fan, i used two 12v fans and soldered them in series because the stock fan is pulling 24v.
Remixed the Y-axis mount so the bottom rear of the extruder does not smash into it in the process of building a new mesh. I just replaced the screw attachment with a 30mm x 4mm slab. This would allow me to affix the mount with double…
Voici 3 profils d'impression pour utiliser Prusaslicer avec votre Sovol SV07
After many many spare time and tests, i've redesigned the sv07+ front plate to be modern, thin, and sleek. It does come with the matching drawer too! I originally made this because my ambient air temperature is always very warm and this…
Well as the title says, this is to extend the mounting position for the belt when upgrading the the sv07+ to linear rails. I printed this in PETG just for a peace of mind that it was strong, I did walls at 3. Infill at 75%. Layer height…
Note - Won't fit with the stock shroud Replaces original inductive probe mount Uses m3 5x4 heatset inserts & m3x8 cap head bolts to attach the mount to the new probe mount 4x m3x4 cap head bolts screwed in part way work well for holding…
Ich habe den Halter so konstruiert das die originale Rolle vom Sovol SV07 eingesteckt und verriegelt werden kann. Gedruckt habe ich es liegend mit 4 Wandlinien und 40% Füllung. Schichthöhe 0,2mm. Es geht bei mir sehr straff rein und da…
this is designed to prevent the filament from tangling up with the printhead, it also reduces friction on the filament. It also reduces the friction on the filament when it is being pulled by the extruder, Imade this because im not using…
It allows you to remove the spool holder and mount the filament sensor on top of the gantry beam. Update 12-18-2024 : version 2 is a snap mount secured by the stock M4 screw in the back of the top gantry replacing the stock filament spool…
a mount for mounting a Cartographer/Beacon eddy current probe on the SV07/SV07+ this was designed for the Cartographer in right angle configuration and the SV07 but i believe it should work for the Beacon and the SV07+ (Fusion file…
A redesign inspired from Sovol SV07 BL Touch Mount by RoyMcNelly on Printables. Redesigned to move the mount and probe out of the way of the tensioner flap to allow extruder gear troubleshooting and cleaning. Designed to print easily and…
An adapter for thing:6308788 SV07 Camera Mount allowing cameras/webcams that are fit with a 1/4x20 thread to be mounted onto the Y belt tensioner of the Sovol SV07. All parts are printable without supports, and no additional metal parts…
This adapter can be used to rotate the display of a Sovol SV07 Plus by 90 degrees. By this the display does not face to the front of the printer, but to the right side. This can increase the accessibility of the display if it was…
Since Sovol's R&D department is so stubborn and unwilling to share absolutely anything about this machine unlike most of their other recent-ish printers, I've created a pinout scheme in order to give the board a new life in my other…
Gantry mounted bowden/ptfe tube guide. I made/remixed this to get the spool of the top gantry and instead print directly from the SH02 filament dryer. Fits the Sovol SV07 and SV07 plus. Snaps in to the two screw holes on top of the…
Sovol SV07 Plus Front Camera Mount is a no-screws needed, slide on camera mount. I prefer to mount my printer webcam front and center instead of the traditional corner location. This mount sides onto the Y-axis tensioner block without any…
This is a fun and fairly silly mod you can do to your SV07/SV07+. It has a part cooling fan that will currently just be sucking in air from your room and blowing it over the print. What if instead you took a hit on the cooling…
This is the solution to your glass bed input shaper mounting problems. The print in places ones either don't fit, or come loose. this one is extremely tight and provides great strength for your test. The results are great. Material to…
Filament runout sensor holder that adds bowden mounts at both ends. Printet with 2 walls, 15% gyroid infill in PLA+
I was not pleased with the selection of build plates for the SV07 plus and wanted to try others out. The Creality K1 MAX build plates are roughly the same size but the guide notches are slightly closer together, so i designed this adapter…
i've printed it in PETG, but depends on the preferences. 0.2 with 15% infill and is sturdy as hell. it's a bit tricky to tighten the side screw, but not impossible.
Requires heat inserts. Print at .15mm layer height or lower for best results. made for better cooling and better clearance of prints with aftermarket nozzles such as a ruby or diamond tip. (not required but it does provide a lot of peace…
Printed with supports and 3 walls, 15% infil. PETG.
This is a waste bin and tray to mount on the side of the SV07 Plus. Updates: January 16 2026 Added a tray that can be mounted instead of the bin itself. This makes it easier to empty the bin Filled in holes on bin February 16 2026 Added…
The brush holder is mounted on the hotbed connector, allowing you to easily move or remove the build plate. You don’t have to worry about the glued silicone wiper when changin plate. The design also takes only a very small space on the…
follow the original file's instructions. I printed this in sirayatech fibreheart GF-ABS on a high temp printer, but as long as you use a high quality filament such as 3D870 PLA would be fine see photos for print orientation. put support…
I had to place my sovol sv07 inconveniently and all the sideways klipper screen holders were for the sv07+ (not compatible), so I made it myself. Use cases: 30 degree stand with rib: a robust and ergonomic stand 30 degree stand: a…
i always loved the look of nozzle cams but most of the standard cameras and mounts didn't work for the SV07. so i found a cheap usb webcam setup with a camera on a short ribbon cable on aliexpress and designed this mount for it. i…
Printing threads is sometimes a pain and the hardware store is so far away. Threading your own bolts is fine as long as the print settings for the ‘rod’ work well and don't cause deformation. The attached file contains Prusaslicer…
i got sick of the stock shroud blocking the view of the part being printer but when i removed it i found the lack of light was also annoying. these mounts let you mount raw 24v led strip in a much more low profile way. since the shroud…
![Conversion kit for the Spine cable chain for the SV07 & SV07 Plus [Fixed]](https://media.printables.com/media/prints/602642/images/4795554_3c8b74be-3e7a-40f7-82f2-7985236209f0_f71f2402-dfc7-4936-b991-5c3a62342dc2/20231003_230737.jpg)
