SV07/SV07+ Extruder LED Strip Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
LED strip mount for SV07/SV07+ toolhead for if the stock shroud/LEDs have been removed
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 365
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
i got sick of the stock shroud blocking the view of the part being printer but when i removed it i found the lack of light was also annoying. these mounts let you mount raw 24v led strip in a much more low profile way. since the shroud has been removed there is a free output on the tool head board that you can connect the strips to and still have full control like the stock leds.
the front one uses 2 M2 bolts to screw through the front fan into the fans mounting plate. these need to be longer than the stock ones so you will need to find some.
the back mount uses 2 of the screws that hold the board onto the tool head and is thin enough to not need different hardware
i initially just used the adhesive from the strips to stick them on but i got concerned that if it fell of it might catch so i added some CA glue to keep them stuck firm
Parts:
- 2x M2x12mm bolts
- 24v LED strip
- Cable with JST SH connector