1 / 3
90 Degree Display Adapter for Sovol SV07 Plus
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter can be used to rotate the display of a Sovol SV07 Plus by 90 degrees.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 38
- Wydruki
- 1
- Wyświetlenia
- 195
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This adapter can be used to rotate the display of a Sovol SV07 Plus by 90 degrees. By this the display does not face to the front of the printer, but to the right side. This can increase the accessibility of the display if it was necessary to rotate your printer.
I printed my adapter in black PLA with a layer hight of 0.15mm.
Parts you will need (in addition to the printer):
- 2x M4 Nut DIN 934 (ISO 4033 should work as well)
- 2x M4x20mm hexagon socket countersunk head screws ISO 10642
How to mount the holder:
- Take the Display out of the original holder
- Remove the original display holder from the printer
- Take the printed display adapter and use two ISO 10642 M4x20 screws to screw it to the threaded holes from the original display holder
- Place two M4 Nuts to the hexagon shaped cutouts at the bottom of the adapter (they did not fall of in my case)
- Take the original display holder and use the two remaining original screws to screw it to the nuts you inserted in the step before