1 / 3
Remix of SV07 Cable Spine Adapter (Hot end side) — zdjęcie 1
1 / 3

Remix of SV07 Cable Spine Adapter (Hot end side)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I modified the hot end side adapter to address clearance issues on the gantry when the hot end is at the far left side.

Ocena
5 / 5
Polubienia
12
Pobrania
97
Wydruki
2
Wyświetlenia
635
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

After seeing several mentions recently of the ribbon cable on the SV07 being damaged by rubbing against the auxiliary fan, I decided to print rogerquin's cable spine and the adapter for it for the SV07 by Kryby. Unfortunately, the hot end side adapter piece is angled such that it hits the gantry when the hot end is all the way to the left, which caused print issues, z tilt alignment issues, and eventually, the piece broke altogether. I modified the piece slightly, making a bit tighter angle, and shortening it a bit to address this issue so the spine no longer hits the gantry. 

The model will print as oriented with supports. I was able to print without a brim. YMMV.

Please be aware that there will still potentially be issues with clearance to the top of the gantry on very tall prints. 

Tagi