Remix of SV07 Cable Spine Adapter (Hot end side)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I modified the hot end side adapter to address clearance issues on the gantry when the hot end is at the far left side.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 97
- Makes
- 2
- Views
- 635
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After seeing several mentions recently of the ribbon cable on the SV07 being damaged by rubbing against the auxiliary fan, I decided to print rogerquin's cable spine and the adapter for it for the SV07 by Kryby. Unfortunately, the hot end side adapter piece is angled such that it hits the gantry when the hot end is all the way to the left, which caused print issues, z tilt alignment issues, and eventually, the piece broke altogether. I modified the piece slightly, making a bit tighter angle, and shortening it a bit to address this issue so the spine no longer hits the gantry.
The model will print as oriented with supports. I was able to print without a brim. YMMV.
Please be aware that there will still potentially be issues with clearance to the top of the gantry on very tall prints.