1 / 4
Accelerometer mounts for Sv07/+
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Boxes for accelerometer to remove the hassle of screwing and unscrewing when measuring input shaping
- Ocena
- 4,6 / 5
- Polubienia
- 31
- Pobrania
- 182
- Wydruki
- 4
- Wyświetlenia
- 650
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 4) (Komentarze: 12)Remiksy (1)Kolekcje (51)Powiązane
Mounts for Sv07/+ accelerometer to make changing its location easier and faster.
Tips and info
- Both mounts use the same locations and orientations as they would without the box.
- would recommend printing the “BOTH” file and printing the other 2 if one happens to break
- for "XAxisAccelerometerMountForSV07PLUS" and "YAxisAccelerometerMountForSV07PLUS", you may need to scale them to mm (or 2540% in scale)
- You will need 2 16mm m3 screws (accelerometer comes with 1).
- Any type of screw head will work as long as diameter is 6>/= and it is flat.
(Use CodeFuPanda’s remix to avoid carriage running into z axis mount. Thanks CodeFuPanda!)
Print settings:
- 3 walls
- 100% infill (you are squeezing the mounts very tightly to keep them secure so you want a very strong part)
- normal orientation
- support enabled (for X axis mount)
- brim enabled if you have bad bed adhesion
Happy printing!
*note: x axis mount makes the Gergo 3d dust cover for the x axis not be able to sit on the x axis so if you use that, I would advise just printing the Y axis mount