1 / 4
Accelerometer mounts for Sv07/+
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Boxes for accelerometer to remove the hassle of screwing and unscrewing when measuring input shaping
- Rating
- 4.6 / 5
- Likes
- 31
- Downloads
- 182
- Makes
- 4
- Views
- 650
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Mounts for Sv07/+ accelerometer to make changing its location easier and faster.
Tips and info
- Both mounts use the same locations and orientations as they would without the box.
- would recommend printing the “BOTH” file and printing the other 2 if one happens to break
- for "XAxisAccelerometerMountForSV07PLUS" and "YAxisAccelerometerMountForSV07PLUS", you may need to scale them to mm (or 2540% in scale)
- You will need 2 16mm m3 screws (accelerometer comes with 1).
- Any type of screw head will work as long as diameter is 6>/= and it is flat.
(Use CodeFuPanda’s remix to avoid carriage running into z axis mount. Thanks CodeFuPanda!)
Print settings:
- 3 walls
- 100% infill (you are squeezing the mounts very tightly to keep them secure so you want a very strong part)
- normal orientation
- support enabled (for X axis mount)
- brim enabled if you have bad bed adhesion
Happy printing!
*note: x axis mount makes the Gergo 3d dust cover for the x axis not be able to sit on the x axis so if you use that, I would advise just printing the Y axis mount