SV07/SV07+ Nozzle Camera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nozzle camera mount for the SV07/SV07+
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 496
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
i always loved the look of nozzle cams but most of the standard cameras and mounts didn't work for the SV07. so i found a cheap usb webcam setup with a camera on a short ribbon cable on aliexpress and designed this mount for it. i couldn't work out a good way to model the curves and the final position so i printed it flat and used a heat gun to bend it into shape. the board mount is glued onto the camera mount to make printing easier, i recommend working out the camera mounting position, screwing the board to the board mount, then gluing it in place.
this works well with my LED strip mounts, though i did find it looked better if i turned the camera exposure way down.
Parts:
- Camera - i got the 68° and 72° ones and found the 68° one to be better (mostly because it couldn't directly see the LED strips)
- double sided foam tape - this was just to attach the camera module itself to the mount