sv07 & sv07+ extruder fan mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
made for better cooling and better clearance of prints with aftermarket nozzles such as a ruby or diamond tip.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 748
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Requires heat inserts.
Print at .15mm layer height or lower for best results.
made for better cooling and better clearance of prints with aftermarket nozzles such as a ruby or diamond tip. (not required but it does provide a lot of peace of mind and a slight quality increase.)
The Creality K1 nozzles with the ruby tips I have confirmed hands on that they work for both the SV07 and the SV07+, being the measurements are the same for a diamondback for the K1 as well I think it is safe to assume they will work all the same.