Deli Cup Fruit Fly Culture Lid (Remix of Adrien L. 3D Model) And Stackable Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reusable deli cup lid for fruit fly cultures.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 269
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution
Print the spacer at 101% XY, can adjust Z value as required for space limitations.
Make sure that insert is facing the same way as the lid body, oriented in the same direction it was printed. Smooth side should face up when inserting into the lid body (With the lid body upside down) or the insert might not fit.
Cut a square of fabric mesh to approximate size of the opening, or flatten coffee filter, then press fit the lid insert over the top of the material. Fit is tight, so make sure that the insert is flush at each of the 4 tabs. Apply even pressure around the insert as you are pressing down.
The spacer can also be used as a base for better stability.
