1 / 2
Canoes with roof rack attachement for TRX4 Defender
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Canoes with roof rack attachement for TRX4 Defender
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 106
- Wydruki
- 0
- Wyświetlenia
- 672
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (21)Powiązane
I've made a attachement for the roofrack on the Defender so it fits 2 1:10 scale Canadian canoe's. Because of the flexibility of the roofrack, you can still reach the pins on the top by tilting the canoe's to the side.
If you print the canoe parts, try adding a brim because of instability. Print the attachements in 100%.
The canoe's are almost 35 cm long and almost 8cm wide.
