SV03 micro swiss ng x gantry 10x20 chain
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add 10x20 chain to SV03 and micro swiss ng set up
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
The cabling on the x gantry of my SV03 kept sagging no matter what I tried. The netting or whatever it's called started getting pulled apart from rubbing on prints and ended up destroying a long print. Mocked this up quick to add 10x20 chain I got from Amazon. Used part of a print found here to anchor to the extruder motor, can't remember which one I used and modified. You'll need 6 m3 and 2 m4 heat set inserts. Pretty self explanatory. The part that gets screwed onto the extruder needs a longer m3 screw, I think I went with 25mm, might have been 30.
