1 / 3
SV03 micro swiss ng x gantry 10x20 chain
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Add 10x20 chain to SV03 and micro swiss ng set up
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 67
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
The cabling on the x gantry of my SV03 kept sagging no matter what I tried. The netting or whatever it's called started getting pulled apart from rubbing on prints and ended up destroying a long print. Mocked this up quick to add 10x20 chain I got from Amazon. Used part of a print found here to anchor to the extruder motor, can't remember which one I used and modified. You'll need 6 m3 and 2 m4 heat set inserts. Pretty self explanatory. The part that gets screwed onto the extruder needs a longer m3 screw, I think I went with 25mm, might have been 30.
