Meanwell APV-08 Safety Cap for Wago 221 connectors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cap to fit over the end of Meanwell APV-08 power supplies to prevent access to live terminals.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 88
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Meanwell APV-8 End Cap for Wago 221 Connectors
This simple cap slides over the end of a Meanwell APV-8 power supply (all voltage variants share the same housing dimensions) and provides a tidy, semi-enclosed space to hold a pair of Wago 221 connectors. It’s designed for use with a 1 mm² twin and earth (T&E) cable, keeping things secure and organised.
The cap fits snugly over the power supply and is secured using a single 3.5 × 16 mm woodscrew through one of the existing mounting holes. A cable tie loop keeps the incoming cable firmly in place. The cable enters straight into the cap.
I designed this part to help solve a neat-wiring problem when using the APV-8 to power small 5V sensors embedded in a ceiling. The compact design means it can fit through most ceiling cut-outs, making installation and maintenance far easier.
Printing
- Printer: Tested on a Prusa XL
- Supports: Probably not required
- Material: PLA (tested)
- Orientation: Various orientations tested.
- Bridging: The interior surfaces aren’t perfect due to bridging, but it doesn’t affect function.
Assembly
- Slide your T&E cable through the opening.
- Connect PSU to cable using Wago 221's
- Wrap cable to fit in enclosure
- Secure T&E with a cable tie to stop it pulling out of cap.
- Slide the cap over the end of the APV-8.
- Secure with a 3.5 × 16 mm screw through the mounting hole.
Safety Note
Always ensure connections are properly insulated and comply with local electrical regulations. You use this model at your own risk.