Meanwell APV-08 Safety Cap for Wago 221 connectors
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cap to fit over the end of Meanwell APV-08 power supplies to prevent access to live terminals.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 3
- Makes
- 0
- Views
- 87
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Meanwell APV-8 End Cap for Wago 221 Connectors
This simple cap slides over the end of a Meanwell APV-8 power supply (all voltage variants share the same housing dimensions) and provides a tidy, semi-enclosed space to hold a pair of Wago 221 connectors. It’s designed for use with a 1 mm² twin and earth (T&E) cable, keeping things secure and organised.
The cap fits snugly over the power supply and is secured using a single 3.5 × 16 mm woodscrew through one of the existing mounting holes. A cable tie loop keeps the incoming cable firmly in place. The cable enters straight into the cap.
I designed this part to help solve a neat-wiring problem when using the APV-8 to power small 5V sensors embedded in a ceiling. The compact design means it can fit through most ceiling cut-outs, making installation and maintenance far easier.
Printing
- Printer: Tested on a Prusa XL
- Supports: Probably not required
- Material: PLA (tested)
- Orientation: Various orientations tested.
- Bridging: The interior surfaces aren’t perfect due to bridging, but it doesn’t affect function.
Assembly
- Slide your T&E cable through the opening.
- Connect PSU to cable using Wago 221's
- Wrap cable to fit in enclosure
- Secure T&E with a cable tie to stop it pulling out of cap.
- Slide the cap over the end of the APV-8.
- Secure with a 3.5 × 16 mm screw through the mounting hole.
Safety Note
Always ensure connections are properly insulated and comply with local electrical regulations. You use this model at your own risk.