1 / 2
Hex Flow One-Piece Stand on top of the qube 540  PC Case — zdjęcie 1
1 / 2

Hex Flow One-Piece Stand on top of the qube 540 PC Case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A headset stand that can be added on top of the Qube 540 Case. A useful invention

Ocena
0 / 5
Polubienia
5
Pobrania
8
Wydruki
0
Wyświetlenia
169
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Share Alike

 How to “plug it in” (LED option that fits the model)

I baked in simple electronics paths so you can add RGB without changing the print:

LED strip channel:

On top of the arm there’s a recess (≈ 8 mm wide × 3 mm deep).

Use a 5 V USB LED strip (8 mm wide—WS2812B or plain 5 V single-color).

Stick it into the recess with tape; the lip edges hide it.

Cable tunnel:

A 6 mm square tunnel runs from the arm root → through the 45° ramp → out the back of the base.

Feed the LED wires through this tunnel to keep the desk clean.

Panel connector cutout (in the base edge):

A 14 × 9 mm rectangular through-slot fits common USB-C or USB-A panel adapters.

Snap/screw the panel adapter in, then plug a normal USB cable from your PC or power bank.

Quick wiring steps

Solder LED leads (5V, GND, Din) → run through the tunnel → into the panel adapter (or straight to USB if using a 5 V strip with pre-wired USB).

If using addressable RGB (WS2812B): add a tiny inline controller (the micro USB “in-line” types) tucked under the base with double-sided tape. If you want to!

 

Fast print recipe (for speed + strength)

Material: PLA+ or PETG

Nozzle: 0.6 mm (faster), Layers: 0.28 mm

Walls: 3 perimeters (1.8 mm with 0.6 mm nozzle)

Infill: 12–20% gyroid (base 15–20%, arm/ramp 20%)

Top/Bottom: 4 top, 4 bottom layers

Cooling: 100% after layer 3 (PLA); moderate for PETG

Seam: back-left; ironing: off (save time)

 each part of that one-piece model does:

  • Hex base: keeps it stable on your desk (Cooler Master’s signature geometry).
  •  
  •  Angled ramp/spine: supports the arm without needing supports when printing.
  •  
  •  Arm and hook: holds your headphones or VR headset.
  •  
  • LED channel + cable tunnel: lets you add lighting and hide wires.

I am sorry if I made any mistakes. English is my second language and I started modeling this week.

Thank You

Tagi