Hex Flow One-Piece Stand on top of the qube 540 PC Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A headset stand that can be added on top of the Qube 540 Case. A useful invention
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 8
- Makes
- 0
- Views
- 169
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
How to “plug it in” (LED option that fits the model)
I baked in simple electronics paths so you can add RGB without changing the print:
LED strip channel:
On top of the arm there’s a recess (≈ 8 mm wide × 3 mm deep).
Use a 5 V USB LED strip (8 mm wide—WS2812B or plain 5 V single-color).
Stick it into the recess with tape; the lip edges hide it.
Cable tunnel:
A 6 mm square tunnel runs from the arm root → through the 45° ramp → out the back of the base.
Feed the LED wires through this tunnel to keep the desk clean.
Panel connector cutout (in the base edge):
A 14 × 9 mm rectangular through-slot fits common USB-C or USB-A panel adapters.
Snap/screw the panel adapter in, then plug a normal USB cable from your PC or power bank.
Quick wiring steps
Solder LED leads (5V, GND, Din) → run through the tunnel → into the panel adapter (or straight to USB if using a 5 V strip with pre-wired USB).
If using addressable RGB (WS2812B): add a tiny inline controller (the micro USB “in-line” types) tucked under the base with double-sided tape. If you want to!
Fast print recipe (for speed + strength)
Material: PLA+ or PETG
Nozzle: 0.6 mm (faster), Layers: 0.28 mm
Walls: 3 perimeters (1.8 mm with 0.6 mm nozzle)
Infill: 12–20% gyroid (base 15–20%, arm/ramp 20%)
Top/Bottom: 4 top, 4 bottom layers
Cooling: 100% after layer 3 (PLA); moderate for PETG
Seam: back-left; ironing: off (save time)
each part of that one-piece model does:
- Hex base: keeps it stable on your desk (Cooler Master’s signature geometry).
- Angled ramp/spine: supports the arm without needing supports when printing.
- Arm and hook: holds your headphones or VR headset.
- LED channel + cable tunnel: lets you add lighting and hide wires.
I am sorry if I made any mistakes. English is my second language and I started modeling this week.
Thank You