1 / 1
Citadel Paint Holder for IKEA Skadis Board
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed from a remix to fit with the IKEA Skadis Board.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
You need to be careful while put them into the holes of the board. Also for removing, carefully.
It is also recommended to print with Infill of min. 40%. Used tree supports.
0.4mm nozzle and 0.2mm layer height and slow to make sure all will print nicely.
Give it a like and posts of makes are welcome.