1 / 3
Nishinoya (Haikyuu!!) Magnet (parametric)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A magnet depicting the haikyuu manga/anime character Yuu Nishinoya
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
2.5D: 2D logo with additional height for some layers.
The model requires by default an 1x8mm magnet but you can change this easily in the provided fusion file. You can always secure the magnet in place with a little bit of glue but it should be a press fit.
Printing Information:
- Print this model with the "magnet hole" flat on the print bed
- Use regular supports to support the top of the hole
- Due to needing 6 colors, you can either print this model directly if you can print 6 colors at a time (ex: with 2 BL AMS units) or you can switch out the black and red colors after 2mm to only need 4 colors at a time.
Note that while this model is free to use, keep in mind that the character it's based on is property of the
haikyuu anime/manga so you should ask permission to its owners would you want to use it commercially.