1 / 8
[OEWH] Raspberry/Arduino Housing contacting with Wago-221-413 clamps — zdjęcie 1
1 / 8

[OEWH] Raspberry/Arduino Housing contacting with Wago-221-413 clamps

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Housing contacting your Arduino or Raspberry with up to 20 Wago-221-413 clamps.

Ocena
0 / 5
Polubienia
6
Pobrania
17
Wydruki
0
Wyświetlenia
308
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
GNU General Public License v3.0

Housing contacting your Arduino or Raspberry with up to 20 Wago-221-413 clamps. Holes are fitting the following footprints: 

  • Raspberry Pi (M2.5 Screws) 
  • Raspberry Pi Zero (M2.5 Screws) 
  • Arduino Uno (M3 Screws) 
  • Arduino Mega (M3 Screws) 

The bottom module can be printed with or without additional cutouts for cables. The top module can be printed with or without vents and a fan mount. 

Pushing in the clamps locks up the inner and middle terminal. The outer remains free for connections on-the-fly.

Printing suggestions:

The Wago clamps are fitting very tightly, your printer should be able to handle tolerances reasonably well, otherwise they might not fit. 

If your printer cannot handle 30° overhangs, i suggest using supports for the top parts.

Tagi