[OEWH] Raspberry/Arduino Housing contacting with Wago-221-413 clamps
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Housing contacting your Arduino or Raspberry with up to 20 Wago-221-413 clamps.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 17
- Makes
- 0
- Views
- 308
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- GNU General Public License v3.0
Housing contacting your Arduino or Raspberry with up to 20 Wago-221-413 clamps. Holes are fitting the following footprints:
- Raspberry Pi (M2.5 Screws)
- Raspberry Pi Zero (M2.5 Screws)
- Arduino Uno (M3 Screws)
- Arduino Mega (M3 Screws)
The bottom module can be printed with or without additional cutouts for cables. The top module can be printed with or without vents and a fan mount.
Pushing in the clamps locks up the inner and middle terminal. The outer remains free for connections on-the-fly.
Printing suggestions:
The Wago clamps are fitting very tightly, your printer should be able to handle tolerances reasonably well, otherwise they might not fit.
If your printer cannot handle 30° overhangs, i suggest using supports for the top parts.