1 / 1
Prusa Core One Magnetic Top Cover – 20x6x2 Magnet Remix — zdjęcie 1

Prusa Core One Magnetic Top Cover – 20x6x2 Magnet Remix

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix with resized magnet slots for 20x6x2 mm magnets. Slide-In 20x5x2 Magnets (from Prusa3D Store)

Ocena
5 / 5
Polubienia
5
Pobrania
36
Wydruki
3
Wyświetlenia
286
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a remix of the original Prusa Core One magnetic top cover with integrated … model on Printables.

What’s changed

Magnet slots resized to fit 20×6×2 mm rectangular magnets
Designed for slide-in magnets
Uses 8 20×6×2 mm neodymium magnets from Prusa3D Store
 

Print settings (suggestion)

Material: PETG
Layer height: 0.2 mm or 0.25mm
Infill: 15–25 %
Supports: not needed 

Print orientation and general settings should be compatible with the original top cover – if in doubt, use the same settings that worked for you there.

4

I used a 0.6 nozzle and the default  0.25mm structural print profile with ASA.

2025-12-09: Added Version without Slider (for use with the auto-open-close feature)

Tagi