1 / 1
Prusa Core One Magnetic Top Cover – 20x6x2 Magnet Remix — image 1

Prusa Core One Magnetic Top Cover – 20x6x2 Magnet Remix

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remix with resized magnet slots for 20x6x2 mm magnets. Slide-In 20x5x2 Magnets (from Prusa3D Store)

Rating
5 / 5
Likes
5
Downloads
36
Makes
3
Views
286
Reviews
3

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a remix of the original Prusa Core One magnetic top cover with integrated … model on Printables.

What’s changed

Magnet slots resized to fit 20×6×2 mm rectangular magnets
Designed for slide-in magnets
Uses 8 20×6×2 mm neodymium magnets from Prusa3D Store
 

Print settings (suggestion)

Material: PETG
Layer height: 0.2 mm or 0.25mm
Infill: 15–25 %
Supports: not needed 

Print orientation and general settings should be compatible with the original top cover – if in doubt, use the same settings that worked for you there.

4

I used a 0.6 nozzle and the default  0.25mm structural print profile with ASA.

2025-12-09: Added Version without Slider (for use with the auto-open-close feature)

Tags