[for test printing] Project 1415 Flamingo type motorboat hull for 3D printing and customization, version 1.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A motorboat hull based on the Project 1415 Flamingo type with a solid deck.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Standard Digital File License
(sale of the entire set upon request)
This model is designed for further model modification after printing.
Included:
• A one-piece hull in actual size, for self-preparation for printing
• A 1:50 scale hull cutout (final length - 424 mm) for printing on a 100x100x100 mm print bed
Recommended print parameters:
• Layer thickness - 0.15
• Wall layers - 3-6
• Top and bottom layers - 0 or 1-2
• Infill - 0
Important note:
Regardless of whether you print with infill on the bottom and/or top, it's best to print the transom section separately, setting the top layer number as 1.5-2 times higher than for the wall . Otherwise, the transom will print as a threads rather than a solid.