[for test printing] Project 1415 Flamingo type motorboat hull for 3D printing and customization, version 1.0
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A motorboat hull based on the Project 1415 Flamingo type with a solid deck.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 60
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Standard Digital File License
(sale of the entire set upon request)
This model is designed for further model modification after printing.
Included:
• A one-piece hull in actual size, for self-preparation for printing
• A 1:50 scale hull cutout (final length - 424 mm) for printing on a 100x100x100 mm print bed
Recommended print parameters:
• Layer thickness - 0.15
• Wall layers - 3-6
• Top and bottom layers - 0 or 1-2
• Infill - 0
Important note:
Regardless of whether you print with infill on the bottom and/or top, it's best to print the transom section separately, setting the top layer number as 1.5-2 times higher than for the wall . Otherwise, the transom will print as a threads rather than a solid.