Double Helical Planetary Gear (Print in Place)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed a custom double helical gear for educational purposes.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This came into existence to continue testing the limits of one of my 3D printers AND to continue developing advanced CAD skills. These were not generated by any form of gear generating software. (Where is the fun in that?) This was designed and printed out of PCTG for both my 3D modeling growth and test this material tolerance for print in place. Printing out of different material may have different results. Ultimately the tolerance is tight enough that it works but loose enough that you can have various gear colors and swap them out. It is designed to lay on a flat surface, as shown in video.
Designed in Solidworks