Clip-On Storage Box for IKEA Kallax Drona Boxes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clips on to your IKEA Kallax shelf's Drona boxes to store additional items.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 107
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a box to hold stuff which clips on to your IKEA Kallax Drona boxes.
I suggest printing the object on one of its sides as shown below; this way I didn't need supports on my MK4S, as the edges leading up to the overhang are angled to reduce the bridging length for minimal droop.
I printed the box out of PLA using the 0.25mm speed profile with a 0.4mm high-flow nozzle, I used 20% gyroid infill; I recommend something less prone to creep under tension like PETG, as the clip will lose its stiffness over time if made of PLA, especially if your Kallax shelf is close to a window where sunlight heats the PLA up (faster creep).
I have included a STEP file for easier modification of dimensions to your needs!
Happy printing :)