(Belt) Clip Camera Holder for DJI RS Mini Quick-Release Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Camera holder for DJI RS Mini Quick-Release Plate, designed to clip on to
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
Before You Proceed
USE AT YOUR OWN RISK!
I am not accountable for any damages that may occur to your camera when using this product.
Description
This is a minimal, leight-weight holder for cameras that have a dJI RS Mini Quick-Release Plate attached to them.
It is designed to fit belts roughly 50 mm wide (≈ 2 inches), or anything else you may clip it on to e.g. a thin box's wall for storing the camera when not in use.
It features a locking bolt-action safety mechanism to secure the camera in place so it doesn't jump out of the holder accidentally. I have made the parts that support the camera's weight thick enough to hopefully never break. I have used this on my Sony A7C II with a 35mm GM F1.4 lens (combined weight of ≈1 kg or ≈2 lb) to carry it around.
STEP file is included in case you want to modify the model.
Print Instructions
I suggest you print this out of a strong, tough material not susceptible to creeping under sustained loads, like ABS or PETG (Do not use PLA).
Use plenty of walls, they tend to provide more strength than infill (≥ 4 walls, for example).
Print on its side (see image below).
Use support enforcers and organic supports in the areas indicated below (these are included in the .3mf file already
The end result should look as shown below
