Flydigi Vader/Apex 3/4 Self-Centering Dock Upgrade (2 options)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Auto center your controller onto the dock every time, so you don't have to worry about getting it to charge.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 104
- Wydruki
- 0
- Wyświetlenia
- 790
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Flydigi Vader 4 Pro Dock Auto-Centering Insert
Unfortunately, Flydigi’s official dock does not auto-center the controller — not sure why, but it’s pretty frustrating. So I fixed that.
Variations
- Smaller variation that requires glue
- Self clicking variation (Recommended)
Installation
Place this insert onto the dock as high as possible — it should sit flush once aligned.
Use double-sided tape or a small dab of glue to secure it in place (Variation 1). Or Clip onto the stand (Variation 2)
Printing Notes
Recommended color: Color match your dock. BUT it is designed to not be visible when the controller is on the dock.
Fitment: The model is extremely precise. If it feels too tight or too loose, reprint at a slightly adjusted scale (±1–2%).
My Printer: Tested on an Elegoo Neptune 3 Pro, fine settings.
Tip: Print walls from outside-in for better dimensional accuracy.
Supports: Both models are designed to not require supports.
Controllers Compatibility list
FLYDIGI Vader 4 Pro (✅ Confirmed)
FLYDIGI Apex 4 (✅ Confirmed)
FLYDIGI Vader 3 Pro (❌ Unconfirmed)
FLYDIGI Vader 3 (❌ Unconfirmed)
FLYDIGI Apex 3 (❌ Unconfirmed)