Flydigi Vader/Apex 3/4 Self-Centering Dock Upgrade (2 options)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Auto center your controller onto the dock every time, so you don't have to worry about getting it to charge.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 104
- Makes
- 0
- Views
- 790
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Flydigi Vader 4 Pro Dock Auto-Centering Insert
Unfortunately, Flydigi’s official dock does not auto-center the controller — not sure why, but it’s pretty frustrating. So I fixed that.
Variations
- Smaller variation that requires glue
- Self clicking variation (Recommended)
Installation
Place this insert onto the dock as high as possible — it should sit flush once aligned.
Use double-sided tape or a small dab of glue to secure it in place (Variation 1). Or Clip onto the stand (Variation 2)
Printing Notes
Recommended color: Color match your dock. BUT it is designed to not be visible when the controller is on the dock.
Fitment: The model is extremely precise. If it feels too tight or too loose, reprint at a slightly adjusted scale (±1–2%).
My Printer: Tested on an Elegoo Neptune 3 Pro, fine settings.
Tip: Print walls from outside-in for better dimensional accuracy.
Supports: Both models are designed to not require supports.
Controllers Compatibility list
FLYDIGI Vader 4 Pro (✅ Confirmed)
FLYDIGI Apex 4 (✅ Confirmed)
FLYDIGI Vader 3 Pro (❌ Unconfirmed)
FLYDIGI Vader 3 (❌ Unconfirmed)
FLYDIGI Apex 3 (❌ Unconfirmed)