DasFilament Refill Adapter for Kaisertech PLA Rolls
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple spacer to put between the refill PLA (850g) from Das Filament and a "traditional" PLA spool which has…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a simple spacer to put between the refill PLA (850g) from Das Filament and a "traditional" PLA spool which has been used up. These spools have the nice feature that one side is screwed on and can be removed easily. Other spools without screws can't be repurposed as easily.
These spools have to be cut to the correct width before use. I cut off 30mm on mine.
This design can in principle be applied to similar filament holders too, the Fusion file is attached and the design can be easily modified with the correct parameters
https://www.dasfilament.de/filament-refill/?p=1
Print Settings
Printer:
Tronxy X8
Rafts:
No
Supports:
No
Resolution:
0.2mm and up, doesn't really matter
Infill:
100%
Category: 3D Printing