DuEnder LED Light Bar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
LED mounts for the DuEnder 3D Printer
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 306
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- GNU General Public License v2.0
An LED Light Bar for the DuEnder. Mounts along the side of the 2040 Extrusions used for the Y axis. Will only work with DuEnder projects that use linear rails.
Mounts to the 2040 extrusion using three M3 bolts and t nuts.
It has holes on the center supports for mounting things on to via M3 bolt. This could also be used as zip tie holes but I created a filament guide that allows running a PTFE tube through the center of the light bar.
the LED light strip slides through the side of the light bar and is held in place by friction. The diffuser I printed with white PLA. Translucent causes too much glare on the bed for my webcam.