1 / 5
Ubiquiti U7-IW (In Wall) Desk/Table Stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Desk stand for Ubiquiti U7-IW: 3 printed parts, hidden cable, M4 nuts required, pause at layer 72.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 129
- Wydruki
- 1
- Wyświetlenia
- 1126
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (19)Powiązane
This is a desk/table stand for the Ubiquiti U7-IW access point, designed to conveniently place the device on a desk or shelf without the need for wall mounting. The stand consists of three 3D-printed parts, ensuring a clean appearance and easy printing without complex supports:
- Base – a wide and stable platform that holds the entire structure securely.
- Vertical stem – a tapered connector between the base and the mounting plate, designed to hide the cable.
- Mounting plate – precisely fitted to the U7-IW’s factory mounting holes, compatible with the original bracket.
Key Features:
- Uses an M4×8 mm bolt and an M4 nut for secure fastening.
- Includes a print pause at layer 72 for inserting 4 nuts during the print process.
- All parts (except for the router’s mounting bracket) require no additional hardware.
- Designed for a clean surface finish with minimal post-processing.
PLEASE before print make shure you have four M4 nuts and pause on 72 layer for insert into plate!