1 / 1
Fliknak the Coward – Craven of the Cracked Maw | 32mm & 75mm Fantasy Miniature | FDM & Resin — zdjęcie 1

Fliknak the Coward – Craven of the Cracked Maw | 32mm & 75mm Fantasy Miniature | FDM & Resin

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Creating a gang of goblins.

Ocena
0 / 5
Polubienia
11
Pobrania
68
Wydruki
0
Wyświetlenia
108
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

🪓 Stat Block: Fliknak the Coward – Craven of the Cracked Maw

Small humanoid (goblin), chaotic evil

Armor Class 15 (The Coward’s Shield + “I’m outta here!” reflexes)
Hit Points 14 (3d6 + 3)
Speed 30 ft.

STR 8 (-1)
DEX 14 (+2)
CON 12 (+1)
INT 10 (+0)
WIS 8 (-1)
CHA 8 (-1)

Saving Throws Dex +4
Skills Stealth +6, Intimidation +1
Damage Resistances Bludgeoning, Piercing, and Slashing from nonmagical attacks
Senses Darkvision 60 ft., passive Perception 9
Languages Common, Goblin
Challenge 1/4 (50 XP)
Proficiency Bonus +2

🐀 Craven’s Cunning

  • Fliknak can use a bonus action to Disengage or Hide.

  • When he takes the Disengage action, he may also move up to 10 ft. as a reaction.

⚔ Actions

Multiattack. Fliknak makes two attacks with his Crude Scimitar.

Crude Scimitar. Melee Weapon Attack: +4 to hit, reach 5 ft., one target.
Hit: 5 (1d6 + 2) slashing damage.

Jitter. (Recharge 6) Fliknak dashes up to half his speed without provoking opportunity attacks.

🛡 Legendary Equipment

The Coward’s Shield. Grants +2 AC and allows Fliknak to use Craven’s Cunning as a reaction when taking the Disengage action.

Character Created in assistance with Tripo3D.

Perfect for resin or FDM printing, this model offers crisp, painter‑friendly detail and a dramatic silhouette—ideal for tabletop RPGs, fantasy dioramas, or collector displays that celebrate stealth, intrigue, and deadly elegance.

⚙ Print Specs

  • Supports: Standard tree auto supports

  • Category: Characters & Monsters

  • Recommended Layer Height: 0.05–0.1 mm (resin) / 0.12–0.16 mm (FDM)

  • Material: Resin or PLA+ for best detail retention

  • Scale: Heroic 1:10 (adjustable for tabletop use)

  • Orientation: Crouched pose with daggers supported

🧱 FDM Printing

  • Use Tree Supports (Default) for optimal overhang coverage.

  • Enable Outer Brim to ensure strong plate adhesion and prevent edge lift.

  • Recommended materials: PLA+ or PETG for best surface finish.

  • Suggested layer height: 0.12–0.16 mm for miniatures and display pieces.

  • Tune flow and retraction for fine detail; slower outer walls yield smoother armor and faces.

🧪 Resin Printing

Use the following settings for reliable, high‑detail results:

Printer: Elegoo Saturn 4 Ultra 16K

Exposure Settings:

  • Layer Height: 0.05 mm

  • Bottom Layers: 5

  • Exposure Time: 2.75 s

  • Bottom Exposure Time: 37 s

  • Transition Layers: 10 (Linear)

  • Rest Times: Before Release – 2 s, After Release – 2 s, After Retract – 4 s

Advanced Settings:

  • Anti‑Aliasing: Level 8

  • Print Time Compensation: Enabled (0.93 s)

  • Light PWM: 255

  • Bottom Light PWM: 255

Supports & Orientation:

  • Use Auto Orientation and Auto Supports (Light) in ChituBox.

  • Ensure proper drainage and avoid flat surfaces directly on the build plate.

Tagi