Fliknak the Coward – Craven of the Cracked Maw | 32mm & 75mm Fantasy Miniature | FDM & Resin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Creating a gang of goblins.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 68
- Makes
- 0
- Views
- 108
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Characters & Monsters
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
🪓 Stat Block: Fliknak the Coward – Craven of the Cracked Maw
Small humanoid (goblin), chaotic evil
Armor Class 15 (The Coward’s Shield + “I’m outta here!” reflexes)
Hit Points 14 (3d6 + 3)
Speed 30 ft.
STR 8 (-1)
DEX 14 (+2)
CON 12 (+1)
INT 10 (+0)
WIS 8 (-1)
CHA 8 (-1)
Saving Throws Dex +4
Skills Stealth +6, Intimidation +1
Damage Resistances Bludgeoning, Piercing, and Slashing from nonmagical attacks
Senses Darkvision 60 ft., passive Perception 9
Languages Common, Goblin
Challenge 1/4 (50 XP)
Proficiency Bonus +2
🐀 Craven’s Cunning
Fliknak can use a bonus action to Disengage or Hide.
When he takes the Disengage action, he may also move up to 10 ft. as a reaction.
⚔ Actions
Multiattack. Fliknak makes two attacks with his Crude Scimitar.
Crude Scimitar. Melee Weapon Attack: +4 to hit, reach 5 ft., one target.
Hit: 5 (1d6 + 2) slashing damage.
Jitter. (Recharge 6) Fliknak dashes up to half his speed without provoking opportunity attacks.
🛡 Legendary Equipment
The Coward’s Shield. Grants +2 AC and allows Fliknak to use Craven’s Cunning as a reaction when taking the Disengage action.
Character Created in assistance with Tripo3D.
Perfect for resin or FDM printing, this model offers crisp, painter‑friendly detail and a dramatic silhouette—ideal for tabletop RPGs, fantasy dioramas, or collector displays that celebrate stealth, intrigue, and deadly elegance.
⚙ Print Specs
Supports: Standard tree auto supports
Category: Characters & Monsters
Recommended Layer Height: 0.05–0.1 mm (resin) / 0.12–0.16 mm (FDM)
Material: Resin or PLA+ for best detail retention
Scale: Heroic 1:10 (adjustable for tabletop use)
Orientation: Crouched pose with daggers supported
🧱 FDM Printing
Use Tree Supports (Default) for optimal overhang coverage.
Enable Outer Brim to ensure strong plate adhesion and prevent edge lift.
Recommended materials: PLA+ or PETG for best surface finish.
Suggested layer height: 0.12–0.16 mm for miniatures and display pieces.
Tune flow and retraction for fine detail; slower outer walls yield smoother armor and faces.
🧪 Resin Printing
Use the following settings for reliable, high‑detail results:
Printer: Elegoo Saturn 4 Ultra 16K
Exposure Settings:
Layer Height: 0.05 mm
Bottom Layers: 5
Exposure Time: 2.75 s
Bottom Exposure Time: 37 s
Transition Layers: 10 (Linear)
Rest Times: Before Release – 2 s, After Release – 2 s, After Retract – 4 s
Advanced Settings:
Anti‑Aliasing: Level 8
Print Time Compensation: Enabled (0.93 s)
Light PWM: 255
Bottom Light PWM: 255
Supports & Orientation:
Use Auto Orientation and Auto Supports (Light) in ChituBox.
Ensure proper drainage and avoid flat surfaces directly on the build plate.